2024+ Subaru Crosstrek Smoked Tail Light Turn Signal and Reverse Pre-Cut Overlay

Elevate the appearance of your 2024+ Subaru Crosstrek with the Smoked Tail Light Turn Signal, Brake Light, and Reverse Pre-Cut Overlay. This product replaces the clear feature with a bold, dynamic style, giving your vehicle a sophisticated and attractive look. Available in Smoked, Light Smoke, Cherry Red and JDM Yellow, choose the ideal color to complement your ride. Fitment: For 2024 Subaru Crosstrek Tail Light Turn Signal and Reverse Overlay Smoke Out High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability) Smoked Tint Vinyl Sticker, Changes Rear of Vehicle to Look More Aggressive  Easy Application Comes in Pair (Driver Side and Passanger Side Rear SMOKE OUT) ** NOTE ** Not Actual Tail Light Replacement, This product is an overlay that covers the Tail Light. How to Install Tail Light Reverse/Turn/Brake signal overlay For Best Results Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee Rinse / Soap your Tail-Light to get rid of debris prior to application Peel off Tail-Light Tint Overlay Align the Overlay from the Inside of the Tail-light trim whether it be the Reverse or Turn SignalLight and work your way to the middle of the rear bumper Align each piece so it covers the entire clear portion of the rear-tail light turn and reverse signal. If using your fingers, start from the pointy edge of the overlay working your way towards the middle of the bumper or vice versa. Swipe left and right gradually to reduce bubbles If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion If there are bubbles make sure you press firmly with your finger and swipe it towards the closest edge If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles. For Best application, use water underneath for CHERRY RED ONLY and squeegee out the water once desired placement is met For Best Application on JDM YELLOW and SMOKE OUTS, apply by dry method. Once the overlay is heated and desired placement is met, peel off the Protective Thin Layer that lines the overlay.