Caddx Turtle V2 800TVL 1.8mm 60fp FPV Camera

Specification:Image sensor: 1/2.7" CMOS sensorHorizontal: 800TVLTV system: NTSC/PAL,changeableVideo Resolution: 1080P@60fps / 1080P@30fps / 720@60fpsPower Input: DC 4.5-20VFPV FOV: 155°Recording FOV: 170°Mini Illumination: 0.01luxImage Resolution: 2 MegapixelsLens: 1.8mm Turbo Eye LensWorking Current: 380mA@5V/160mA@12V (low consumption)OSD Menu: Yes (Support Voltage Display)Video Files: MP4Audio: SupportElectronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100S/N Ratio: >60dB (AGC OFF)Video Output: CVBSMax Micro memory Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)Net weight: 12g(more or less)Color: Red/BlackFeatures:-New Turbo Eye lens-More rational PCB layout and 20x20mm mounting holes - no offset hole!-Microphone-Wrapped cable-Default image setting improvementsQuick operation guide:1. RIGHT BUTTON: Press the RIGHT button for 3s-5s to activate video recording, in the meanwhile the light on the lower right corner will flicker.2. LEFT BUTTON: Press the LEFT button for 3s-5s to stop video recording.3. DOWN BUTTON: Press the DOWN button for 3s-5s to switch the resolution, 720P with Blue LED on, 1080P with Red LED on, the default mode is 1080P.4. MIDDLE BUTTON: The MIDDLE button is the menu button.Notice: The camera need at least 8G Class 10 memory card.Notes: If the power is cut accidentally when video recording, please power on again, then the camera will automatically restore the memory,and the video records before power cut will be still saved in TF card.Package included:1 x Caddx Turtle V2 Camera1 x 5D-OSD Menu Board1 x Bracket for camera1 x 30x30mm mounting bracket1 x 4pin FPV Silicon Cable (extend into a 2pin joint for OSD board and a 3pin joint for FPV)1 x Internal hexagonal wrench1 x Manual1 x Warranty card