CADDX Turtle V2 800TVL NTSC / PAL CMOS Sensor FPV Camera

Specification: Image sensor: 1/2.7" CMOS sensor Horizontal: 800TVL TV system: NTSC/PAL,changeable Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps Power Input: DC 4.5-20V FPV FOV: 155° Recording FOV: 170° Mini Illumination: 0.01lux Image Resolution: 2 Megapixels Lens: 1.8mm Turbo Eye Lens Working Current: 380mA@5V/160mA@12V (low consumption) OSD Menu: Yes (Support Voltage Display) Video Files: MP4 Audio: Support Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II) Net weight: 12g(more or less) Color: Red/Black Features: New Turbo Eye lens More rational PCB layout and 20x20mm mounting holes - no offset hole! Microphone Wrapped cable Default image setting improvements Quick operation guide: RIGHT BUTTON: Press the RIGHT button for 3s-5s to activate video recording, in the meanwhile the light on the lower right corner will flicker. LEFT BUTTON: Press the LEFT button for 3s-5s to stop video recording. DOWN BUTTON: Press the DOWN button for 3s-5s to switch the resolution, 720P with Blue LED on, 1080P with Red LED on, the default mode is 1080P. MIDDLE BUTTON: The MIDDLE button is the menu button. Notice: The camera need at least 8G Class 10 SD card. Package included: 1 x Caddx Turtle V2 Camera 1 x 5D-OSD Menu Board 1 x Bracket for camera 1 x 30x30mm mounting bracket 1 x 4pin FPV Silicon Cable (extend into a 2pin joint for OSD board and a 3pin joint for FPV) 1 x Internal hexagonal wrench 1 x Manual 1 x Warranty card Note: Full-size metal bracket shown in some photos is not included at this time.