EtherWAN EasyLink MP Preconfigured Multipoint IP67 Wireless Bridge Kit, 6 Clients
EtherWAN EasyLink MP Preconfigured Multipoint IP67 Wireless Bridge Kit, 6 Clients EtherWAN’s EasyLink is a pre-configured Multipoint Bridge kit which allows for connecting a set of remote locations wirelessly up to 2 miles away. EasyLink MP’s simple setup allows you to connect locations by mounting the hardware, powering them on, and aligning the units using the built-in alignment LEDs. Each kit contains one central bridge unit plus two/four/six auxiliary units that connect automatically using a highly secure, unique, and hidden SSID and randomly generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected. Key Features Mount units to a pole or wall using included mount kit Signal strength LED's for easy alignment Just power and align using supplied PoE injectors and power supplies No technical expertise needed Encrypted & Authenticated Wireless Connection (WPA2) Every kit has unique SSID and security settings Management Frame Protection (MFP) enabled Fanless and ruggedized outdoor IP67 enclosure (Rainproof) Wide operating temperature range (-40 to 167°F) Connections up to 2 miles away Technical Specifications Wireless Frequency 5 GHz Max data rate 300 Mbit/s Number of chains: 2 per unit Standards 802.11a/n WPA2 Passphrase 256-bit AES-CCM Encryption Dynamic Frequency selection Layer 2 Features Auto-negotiation for port speed and duplex Redundant Protocols (always enabled) IEEE 802.1D STP IEEE 802.1w RSTP IEEE 802.1s MSTP Ethernet Primary Node: 10/100/1000BASE-T Passive PoE Auxiliary Node: 10/100/1000BASE-T Wireless 802.11a/n LED Indicators Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3x full duplex and flow control IEEE 802.1D STP IEEE 802.1s MSTP IEEE 802.1w RSTP IEEE 802.11w Management Frame Protection (MFP) Power Primary Node: PoE in (Active PoE 802.3at/bt) Max power consumption 17W Auxiliary Node: PoE in (Passive PoE) PoE in input Voltage 6-30V Max power consumption 11W Primary Node Dimensions 270 x 565 x 76mm (W x H x D) 10.63” x 22.25” x 3” Primary Node Weight (shipping) 6.2lbs (2.81kg) Installation Type Pole/Wall Casing Material UV Protected Polystyrene case Auxiliary Node Dimensions 185 x 185 x 63.5mm (W x H x D) 7.28” x 7.28” x 2.5” Auxiliary Node Weight (shipping) 2 units per box: 7.15lbs (3.25kg) Auxiliary Node Installation Type Pole/Wall Auxiliary Node Casing Material UV Protected Polystyrene case Operating Temp. -40 to 75°C (-40 to 167°F) Storage Temp. -45 to 85°C (-49 to 185°F) Relative Humidity 5% to 95% (non-condensing) Wind Survivability 200km/h Regulatory ISO Manufactured in ISO-9001 facility EMI FCC Part 15B Class A PCC Part 15C Environmental Test Compliance IEC 60068-2-6 Fc (Vibration Resistance) EN 61000-4-3 (Radiated RFI) Warranty 3 years What’s Included 1 Wireless Bridge Base unit 6 paired Wireless Bridge Clients 7 x 24VDC, 1.5A Power Supplies 7 x Passive PoE Injectors7 x Mounting kits