EtherWAN EasyLink Series Preconfigured IP67 Wireless Bridge Kit

EtherWAN EasyLink Series Preconfigured IP67 Wireless Bridge Kit EtherWAN's EasyLink is a pre-configured point to point (PtP) Bridge kit which allows for connecting remote locations wirelessly up to 2 miles away. EasyLink's simple setup allows you to connect locations by mounting the hardware, powering them on and aligning the units using the built-in alignment LEDs. Each kit contains two paired units that connect automatically using a highly secure, unique, hidden SSID and randomly-generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected. Key Features Mount units to a pole or wall using included mount kit Signal strength LED's for easy alignment Just power and align using supplied PoE injectors and power supplies No technical expertise needed Encrypted & Authenticated Wireless Connection (WPA2) Every kit has unique SSID and security settings Fanless and ruggedized outdoor IP67 enclosure (Rainproof) Wide operating temperature range (-40 to 167°F) Connections up to 2 miles away Technical Specifications Wireless Frequency 5 GHz Max data rate 300 Mbit/s Number of chains: 2 Standards 802.11a/n WPA2 Passphrase 256-bit AES-CCM Encryption Dynamic Frequency selection Layer 2 Features Auto-negotiation for port speed and duplex Redundant Protocols (always enabled) IEEE 802.1D STP IEEE 802.1w RSTP IEEE 802.1s MSTP Ethernet 10/100/1000BASE-T Passive PoE Wireless 802.11a/n LED Indicators Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3x full duplex and flow control IEEE 802.1D STP IEEE 802.1s MSTP IEEE 802.1w RSTP IEEE 802.11w Management Frame Protection (MFP) Power PoE in (Passive PoE) PoE in input Voltage 6-30V Max power consumption 10W Casing Material UV Protected Polystyrene case Dimensions 185 x 185 x 63.5mm (W x D x H) 7.28" x 7.28" x 2.5" Weight (shipping) 5.3lbs (2.4kg) Installation Type Pole/Wall Operating Temp. -40 to 75°C (-40 to 167°F) Storage Temp. -45 to 85°C (-49 to 185°F) Relative Humidity 5% to 95% (non-condensing) Wind Survivability 200km/h *Power supply rated 5 to 158°F ISO Manufactured in ISO-9001 facility EMI FCC Part 15B Class A PCC Part 15C Environmental Test Compliance IEC 60068-2-6 Fc (Vibration Resistance) EN 61000-4-3 (Radiated RFI) Warranty 3 Years What’s Included 2 x units preconfigured to connect with optimal performance up to 300Mbps Includes all Mounting Hardware Includes 2 x power supplies and 2 x PoE injectors