236cc - 72mm x 58mm Small GX Cast Short Block Kit

Everything you need to assemble a 236cc small block GX200 clone Short Block. You will need to clearance the block and your cam, but this crank, rod, and piston will all drop right into the TC225 block with the piston 0.004" above the deck. Use a head gasket with a minimum of 0.045"/1.1mm thickness. Clearancing will be required for assembly. This kit includes the following:  72mm bore x 136.8mm deck height TC225 block Cast aluminum 7 bolt side cover Forged 58mm crankshaft with GX200/Clone (1.181"/30mm) rod journal ARC 6266 billet 3.343" connecting rod 72mm bore x 23mm compression height x 18mm pin x .550" pin height cast aluminum flat top piston kit with rings, pin, and clips 2x Crankshaft bearings 2x Crankshaft seals 2x Magnetic drain plugs with safety wire hole 1x Oil sensor and governor hole plug kit 1x pair of solid side cover dowels 1x pair of head dowel pins 1x set of side cover bolts 1x set of grade 10.9 head bolts 7 bolt side cover gasket 72mm x 0.045" thick head gasket Optional