Allen & Heath AH-DX164-W 16-In / 4-Out 96 kHz Expander
creationnetworks.net
Electronics / Audio

Allen & Heath AH-DX164-W 16-In / 4-Out 96 kHz Expander

$2,399.00
{{option.name}}: {{selected_options[option.position]}}
{{value_obj.value}}
Store Logo

Creation Networks

View Store

The Allen & Heath DX164-W 16-In / 4-Out 96 kHz Expander is a wall- or floor-mountable expander that adds remote I/Os to a dLive, Avantis, or SQ mixer or to an AHM audio matrix processor. It provides 16 balanced XLR mic-/line-level inputs with individually configured Phantom Power, and 4 balanced XLR line outputs. No configuration is required, just connect to your mixer and you're ready to go. Firmware updates are handled automatically by the mixer. Features  For dLive, Avantis, SQ Mixer For AHM Audio Matrix Processor 16 XLR Balanced Mic Preamps, +60 dB Gain 4 XLR Balanced Line Outs/Relay-Protected Plug-and-Play Design Phantom Power, -20 dB Pad Redundant and Cascade Modes Connects via Single Cat 5e Cable IEC Mains Power, 12 VDC Backup Wall or Floor Mount Specs General Compatibility Allen & Heath AHM / dLive / SQ Inputs Mic/Line Inputs: 16 x Balanced XLR, +48 V Phantom Power Mic/Line Preamp: Fully Recallable Input Sensitivity: -60 to +15 dBu Analog Gain: +5 to +60 dB, 1 dB steps Pad: -20 dB Active PAD Maximum Input Level: +30 dBu (PAD In) Input Impedance: >4 Kilohms (Pad Out), >10 Kilohms (Pad In) Mic EIN: -127 dB with 150 Ohms Source Outputs Analogue Outputs: 4 x XLR Balanced, Relay-Protected Output Impedance: <75 Ohms Nominal Output: +4 dBu = 0 dB Meter Reading Maximum Output Level: +22 dBu Residual Output Noise: -92 dBu (Muted, 20 Hz to 20kHz) / -90 dBu (Muted, 20 Hz to 40kHz) Power Mains Voltage Operating Range: 100 to 240 VAC, 50/60HzMains Power Consumption: 35 W maxDC Input: 12 VDC, 3 A max Inputs / Outputs Connector 1 16x XLR Female Connector 2 4x XLR Male Environmental Operating Temperature 32 to 95°F / 0 to 35°C

Show More Show Less