Crestron 3-Series® Card Interface 1 Slot, w/PoE Injector - CEN-CI3-1-POE (Discontinued)
Spec Sheet (Discontinued) The Crestron® CEN-CI3-1 is a compact device designed to provide a versatile control interface and expansion solution using any single 3-Series® Control Card. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet or located remotely near the device(s) under control. It can be rack-mounted, placed on a shelf, or attached under a table.[1] It interfaces with the control system via Ethernet and can be powered via PoE or a dedicated 24V power pack.[2] The CEN-CI3-1 accepts one 3-Series control card (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.[3] Features Accepts one 4-Series® Control Card Provides control port expansion for any 4-Series Control System® Powerable via PoE or an external power pack [2] Single-space, half-width 19-inch rack-mountable [1] Under-table mountable [1] Specification CEN-CI3-1-POE Specifications Communications Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.3at Type 1 compliant USB For computer console Connectors & Card Slots Card Slot (1) 3-Series® control card expansion slot LAN PoE (1) 8-pin RJ45, female;10Base-T/100Base-TX/1000Base-T Ethernet port;Power over Ethernet compliant 24VDC 2A MAX (1) 2.1 x 5.5 mm DC power connector;24 Volt DC power input [2] G (1) 6-32 screw, chassis ground lug COMPUTER (front) (1) USB Type B female;USB 2.0 computer console port (6 ft cable included);For setup only Controls & Indicators PWR (1) Green LED, indicates operating power supplied from power pack or PoE SLOT (1) Green LED, indicates a control card is inserted RESET (1) Recessed pushbutton for hardware reset SETUP (1) Recessed pushbutton with red LED for Ethernet auto-discovery LAN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity Power Requirements Power Pack 2 Amps @ 24 Volts DC [2] Power over Ethernet IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) PoE Powered Device Environmental Temperature 41° to 113° F (5° to 45° C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation <1 BTU/hr without cards using 24V power pack, 5 BTU/hr without cards using PoE[3] Enclosure Chassis Metal, black finish, vented sides Front Panel Metal, black finish, polycarbonate label overlay Mounting Freestanding, under-table mountable, or 1RU half-width 19-inch rack-mountable (adhesive feet included, under-table and rack mounting kits sold separately) Dimensions Height 1.70 in (44 mm) without feet Width 7.07 in (180 mm) Depth 10.06 in (256 mm) Weight 2.0 lb (0.91 kg) without card