Crestron 3-Series® Control Processor Card Interface (3 Slot) - CEN-CI3-3 (Discontinued)
Spec Sheet (Discontinued) The Crestron® CEN-CI3-3 is a single-space rack-mountable device designed to provide a versatile control interface and expansion solution using up to three 3-Series® Control Cards. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet, or located remotely near the device(s) under control. It can be placed on a shelf or rack-mounted using the rack ears included. It interfaces with the control system via Ethernet. The CEN-CI3-3 accepts three 3-Series control cards (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.[1] Features Accepts up to three 3-Series® Control Cards Provides control port expansion for any 3-Series Control System® External power pack included Single-space 19-inch rack-mountable Specification Communications Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP USB For computer console Connectors & Card Slots S1 – S3 (3) 3-Series® control card expansion slots CONTROL SUBNET IN (1) 8-wire RJ45 jack;10Base-T/100Base-TX/1000Base-T Ethernet port CONTROL SUBNET OUT (1) 8-wire RJ45 jack;10Base-T/100Base-TX/1000Base-T Ethernet port 24VDC 2A MAX (1) 2.1 x 5.5 mm DC power connector;24 Volt DC power input;PW-2420RU power pack included G (1) 6-32 screw, chassis ground lug COMPUTER (front) (1) USB Type B female;USB 2.0 computer console port (6 ft cable included);For setup only Controls & Indicators PWR (1) Green LED, indicates operating power supplied from power pack MSG (1) Red LED, indicates unit has generated an error message RESET (1) Recessed pushbutton for hardware reset SETUP (1) Recessed pushbutton with red LED for Ethernet auto-discovery SLOT 1 – 3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots CONTROL SUBNET IN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity CONTROL SUBNET OUT (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity Power Requirements Power Pack 2.0 Amps @ 24 Volts DC;100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included Environmental Temperature 41° to 113° F (5° to 45° C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 6 BTU/Hr without cards [1] Enclosure Chassis Metal, black finish, vented yop and sides Front Panel Metal, black finish, polycarbonate label overlay Mounting Freestanding or 1RU 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions Height 1.70 in (44 mm) without feet Width 17.28 in (439 mm);19.00 in (483 mm) with rack ears Depth 10.06 in (256 mm) Weight 5.0 lb (2.3 kg) without cards