BMW Scanner V 1.4.0 Diagnostic Tool PA Soft E38 E39 E46 E53,Win XP,7,8,10,Vista

***PINS 7 & 8 ARE SOLDERED***This PA Soft unit is built to be ready to go upon receipt. Included on the USB drive are video and print instructions on how to set up the software on any Windows OS version. Contact email is included, and technical support via Teamviewer is available if needed. If you're contemplating buying one of these units, they're powerful tools to aid in ownership of a superb era of motor vehicles. We personally own M6x powered E34, E38 and E39 cars(sold our M62b46 E53). Buy with confidence from folks that know these cars well.  Works with Windows XP, Vista, 7, Windows 8, Windows 10. We can provide remote support if needed.    Package Contents: USB Cable Scanner Device General Functions include: Determine chassis number, model, engine, gearbox  and so forth Identification Data Odometer value VIN and ADFG Programming information Error Codes (DTC) Reading and Saving Functions: Program memory EEPROM Coding Data DTC and DTC Shadow-memory Live Data Programming info Copying ZCS (IKE - EWS) and FA (IKE - LCM) coding And much more... Unlock Functions: DTCs description in DME MS43.0, EWS3, SRS MRS4 Clearing DTCs in same units EWS-DME synchronization code in DME MS43.0 Live data in DME MS43.0, EWS3, SRS MRS2 and MRS4 Status of all keys in EWS3 EWS3 coding data interpretation Equipment correction in SRS MRS4 **Will Work on the Following OBDI & OBDII BMW Models(functions limited by what’s available in each module) 1992 - 1999 E36:   3-Series1999 - 2006 E46:   3-Series1996 - 2003 E39:   5-Series1995 - 2001 E38:   7-Series2000 - 2006 E53:   X5 ; E83 - X3 ; E85 - Z4** Will have less features on BMWs older than 1998 For cars that are have the 20 pin connection under the hood you would need OBD2 female to 20pin Adapter Cable(not included in this listing) Below are some general tips and tricks for commonly sought changes/adjustments in various modules. Please note that not all modules may have the same function lists as shown below. This varies by chassis/engine/manufacture year. ZKE Options: To do any of the functions in the ZKE section: - select "Coding data” To activate the alarm optics without having a physical alarm: -check DWA -check the options with "optics" *note if you have bits and pieces of the oem alarm, you may enable those options To activate a OEM alarm: -check DWA -check DWA interior sensor -uncheck DWA interior sensor, rear (unless you have a convertible which has a front and rear interior sensor) -check DWA tilt alarm sensor -check the options with "optics" and "acoustics" *note you must have all 3 (4 for convertibles) pieces to the alarm otherwise your car will throw a code. e.g. you have the siren and motion sensor but no tilt; your DWA will show a fault and will not arm. Siren will still go off if doors are breached. To enable remote closing windows: -default "Opening (remote control)" is checked and "Locking (remote control)" is unchecked -check "Locking (remote control)" to enable closing with remote *note the lock button closes and unlock opens the windows upon holding of the key  To enable one click to unlock all doors:  -default "Selective" is checked. This allows one click of the unlock button of the remote to unlock the drivers door. A second click unlocks remainder passenger doors -check "No" to unlock all doors with one press of the unlock button To change the tilt of the passenger mirror when in reverse: -default "Memory" is unchecked -set mirror switch to passenger. The mirror will tilt to your personal position.  -to set your position, have switch on passenger side, and adjust your mirror while in reverse gear. *note if "Memory" is checked mirror switch must be set to passenger for option to work. Switching to driver will disable the auto-tilt. **note if "Memory" is unchecked mirror switch must be set to driver for tilt to work (by default it tilts to the maximum amount). Switching to passenger will disable the auto-tilt. EWS Options: To check the number of keys you have used: -select key status -you may also disable keys if you lost them from this menu as well note To view live data: -select live data To DISABLE the clutch switch: -select "Coding data" -select "Settings and manufacture settings"-select Manual transmission note* only for manuals note** this allows you to start the car without having to depress the clutch  SRS Options: To view live data about your airbags: -select live data To DISABLE seat occupancy sensor: -select "coding data" -select "Equipment" -uncheck "Seat occupancy recognition"To DISABLE seat belt light: -select "coding data" -select "Equipment" -uncheck "Seat-belt buckle switch"  IKE Options: In the IKE menu you can change items such as service intervals frequency (i.e. mi/km until next service), etc  LCM Options: To enable or disable your DRL: -select "coding data" -toggle the options for "running lights"   NOTICE This diagnostic device will work perfectly if your BMW's electrical system is in healthy operating condition. Only the software provided can be used with this unit. No guarantees can be made that this unit along with any other device will fix or repair a vehicle that has been wrecked, burned, modified, or flooded. We are not held liable for any misuse of this device that may have caused problems to your vehicle. Professional support may be needed if your vehicle suffers from electronic glitches.