NanoVNA V2 4.3 inch 3GHz NanoVNA-F V2 HF VHF UHF Vector Network Analyzer Antenna Analyzer SWR
Features: NanoVNA-F V2 is a new generation of portable, stand-alone vector network analyzer with 4.3" IPS LCD screen, metal enclosure, 5000mAh battery and SMA connectors. It is a product based on edy555's NanoVNA and OwOComm's S-A-A-V2. The measurement frequency range of NanoVNA-F V2 is up to 3GHz. The S21 dynamic range is better than 70dB at 50kHz-1.5GHz and better than 60dB at 1.5GHz - 3GHz. NanoVAN-F V2 can work continuous for 7 hours duo to the large capacity battery and low-power consumption design. Sprcifiaction: Frequency range: 50kHz ~ 3GHz S11 dynamic range: 50dB(50kHz ~ 1.5GHz), 40dB(1.5GHz ~ 3GHz) S21 dynamic range: 70dB(50kHz ~ 1.5GHz), 60dB(1.5GHz ~ 3GHz) RF output power: -9dBm Frequency tolerance: 0.5ppm Screen: 4.3" IPS LCD, 800*480, RTP touchpad Operation via touch screen or 3 side buttons Battery: 3.7V Li-Po, 5000mAh Aluminum enclosure: 125mm x 75mm x 20mm SMA femal RF port Sweep points: 101 Calibration result storage: 5 Calibration result interpolating supported Traces: 4 Markers: 4 Measures: S-parameter, VSWR, smith chart, phase, ploar, etc. Mark table can be moved up and down Firmware upgrade via U-disk with type-c cable USB power output: 5V/1A Compatible with NanoVNA-saver, support screenshot Package list: NanoVNA-F V2 x1 20cm SMA-JJ RG405 cable x2 Calibration kit: SMA OPEN/SHORT/50ohm LOAD SMA-KK adapter x1 SMA-JJ adapter x1 SMA-JKW adapter x1 USB Type-C cable x1 Stylus x1 NanoVNA-F V2 has excellent dynamic performance and can be used to test UHF and VHF duplexers： 868MHz antenna testing: 915MHz antenna testing: 2.4GHz microstrip filter testing: nanovna-saver Screenshot via nanovna-saver circuit board design of NanoVNA-F V2: PORT1 RF power level: