3M® VHB™ Semi-Permanent Adhesive Hook-Fastener (2-PCS) For Jeep Molded Headliner

Includes 2x 3M™ VHB™ (very high bond) semi-permanent adhesive hook-fastener. Use as a spare or replacement adhesive for Jeep Molded Storage Headliners. 3M™ 2-pc set (for one side): 12" L x 4" W (30.5 x 10.2 cm) and 16" L x 4" W (40.6 x 10.2 cm). Pressure Sensitive Adhesive Hook Fastener Application Instruction: 1. Thoroughly clean the surface of the adhered substrate, remove oil, water, and dust, etc. and wait for it to dry completely. All cleaning agents should be tested prior to using, to be sure the cleaning agent will not have adverse effects on the substrate. (Citrus cleaners are not recommended.) In automotive hardtop interior application, Isopropyl alcohol (rubbing alcohol) may be a sufficient cleaning agent. 2. Peel the release liner from fastener tape and press firmly back and forth for at least 2 minutes into place. Note: Apply adhesive only indoors free of dirt and dust at room temperature 15°C-26°C/59°F-79°F and relative humidity 40%-60% (the lower the humidity, the better