.020" Flexible Plastic Sheet Black/Gold - 12" x 12" Sheet

This is a lightweight plastic that resembles metal and is laser safe; the sheet is black but engraves gold with a 3M sheet as the back masking. The material's thickness is .020 inches. Recommended Settings  Posted settings are recommendations only. For best results, it is recommended you attempt a small test area before moving forward with a larger design. Results may vary on each machine due to a variety of factors such as machine type, age, and maintenance.Recommended Glowforge Settings - Before putting the material in your bed you will need to remove the clear plastic covering on the front. The material should go black side up. This material is also lightweight, so using honeycomb pins to hold it in place is a must. You will need to change your focus point to .020. We recommended cutting this flexible plastic at a speed of 430 and power of 100 settings. When engraving this flexible plastic we recommend you use a speed of 1000 and power of 30.Recommended 60W Settings - Before puttin