IN600 Bosch EV14 Fuel Injector Set Honda J-series V6 J37 J35 J32 J30

Flowrate at 43.5psi: 700cc Gasoline, 630cc N-Heptane Quantity: Six (6) Type: Bosch EV14 Length o-ring to o-ring: 48mm (short) or 60mm (tall) Inlet diameter: 11mm (small) or 14mm (large) Connector: your choice of unwired EV6 clips or wired USCAR to OBD2 adapters Fits: Honda V6 J-series (J37, J35, J32, J30).  The IN600 fuel injector uses a 16-hole atomizer plate to create two spray cones spread apart at a 20 degree angle. Each cone is 17 degrees wide. Each injector will come with new inlet o-rings. NOTE: For proper spray angling, set the connectors straight up or down (in-line with your valve stems). The cones will then spray 90 degrees on either side. They will work in other positions, but not as efficiently.   Note: Honda used 4 different styles of injectors in these motors, you MUST confirm before ordering which style you have. Refer to the pictures and the info below; If you are unable to confirm, please contact us at injectornation@gmail.com Type-1: Early J30's (mostly Honda Accord)