1.2GHz 0.1/25/200/800mW A/V VTX Transmitter VRX Receiver 9CH 1060~1380MHz for Long Rang Drone

1.2GHz 0.1/25/200/800mW A/V VTX Transmitter VRX Receiver 9CH 1060~1380MHz for Long Rang Drone VTX Transmitter:一. Button control and LED light1. 4 green lights represent frequency：0.1mW（0）/25mW（D)/200mW(C)/800mW(H), Boot default is 0.1mW. Long pressof the button could switch into next frequency. Cycle the operation，every long press means the frequency switch and the light on. Note：the frequency needs to be adjusted every time thepower cut off2. 9 red lights represent band，short press could switch into nextband,this operation can be cycled. Every short press means the bandswitch and the light on. Note：the operation has the setting memory, the systemcould save the current band when the power cut off二. Interface definition：1. The antenna type is SMA: The antenna head is "external thread +hole", and the antenna rod is "internal thread + needle". It is equipped with a 1.2G special customized "Y" antenna2.7P1.25 interface arrays：1).power input DC 7-28V;2).input ground；3).video input；4). 6.5M audio input ；5).DC output 7-28V; 6).DC output ground；7_.DC output 5V VRX Receiver:一. Button control and LED light1. 9 Red led lights represent the frequency, short press once to switch into next frequency. Cycle the operation, every short press means the frequency switchand the light on.Note: the operation has the setting memory, thesystem could save the current frequency when the powercut off. 二. Interface definition：1.The antenna type is SMA: The antenna head is "external thread + hole", and the antenna rod is "internal thread + needle". It is equipped with a 1.2G special customized "Y" antenna2.7P1.25 interface arrays：1). power input DC 7-28V;2). input ground；3). video input；4). 6.5M audio input ；5). DC output 7-28V; 6). DC output ground；7).DC output 5V.3. 5P Pad definition array：1.power input DC 7-28V；2.input ground；3.video input；4.DC output 5V；5.DC output ground Specifications:VTX Transmitter:Frequency band: 1060~1380MHzChannel customer: 9Channel Frequency: 1080/1120/1160/1200/1240/1280/1320/1360/1258(MHz)Audio Sub-carrier: 6.5MHz/6.0MHzModulation type: FMFrequency control: PLLAudio sub-carrier control: PLLFrequency Stability: ±100KHz (Typ.)Frequency precision: ±200KHz (Typ.)A/V （Ratio）: -26±2dBS/N(Fo±3MHz): >70dBcChannel Carrier error: 1dBAntenna Port: 50 OhmsInput format: NTSC or PALVideo input level: 1V±0.2Vp-p typeAudio input level: 1V±0.2Vp-p typeOperating Temperature: -10℃~+60℃Input power supply DC: 7-28VOutput voltage DC: 7.28V ; DC5VProfile dimension: 45.5mm（L）*35.8mm(W)*8.4mm(H)Installation hole position: 30.5mm x 30.5mmNet weight: 10g VRX Receiver:DC CharacteristicsPOWER SUPPLY: 5.0VCurrent Consumption: (280 ±40)mAEnvironmental SpecificationOperating Temperature: -10~+65 ºCStoring Temperature: -30~+85 ºCOperating humidity: 85%RHRFReceiving frequency range: 1050~1380MHzVoltage Standing Wave Ratio: 2:1Demodulation system: FM/PLLIF: 480MHzANT. input impedance: 50Ω, Typ. LO Frequency stabilization: ±200kHzLO Frequency Precision: ±200kHzLO Control: PLLInput LO Leak: -65dBmReceiving Sensitivity: -95dBmInput Level Range: -95 dBm ~+5 dBmVideo CharacteristicsVideo Output impedance: 75Ω, Typ. Video Output Level 1Vp-p, Typ. Video Polarity （NEGATIVE）Video Frequency Respone: ±5 dB, Max. 50Hz ~ 6MHzDifferential Gain: ±5 %, MaxDifferential Phase: ±5 Deg., Max3Db IF WIDEBAND: 16.5MHzS/N: 38dB, MinRSSI Output Voltage(-30dBm~-90dBm): 1.3~0.7VAudioAudio Output impedance: 2KΩ, Typ. Audio Output Level: 1±0.2Vp-p, Typ. Audio Output Frequency Range: 100Hz ~ 20kHzAudio carrier: 6.0MHz(AR), 6.5MHz(AL)Audio carrier precision: ±30kHzS/N(50Hz ~ 15kHz): 50dB, MinTHD：(50Hz ~ 15kHz, 3 Vp-p) 1.5 %, MaxProfile dimension: 44mm（L）*27mm(W)*27mm(H)Net weight: 20g Package Included:VTX Transmitter:1X VTX module 1X “Y” type antenna 1X 7P 1.25 single head cable VRX Receiver1X VRX module 1X “Y”type antenna 1X Two-channel Video output cable 1X 7P 1.25 single1 head cable