Mayrc MR-PETG 3D Printing Materials 1.75 mm Cost-effective Printer Consumables White 1kg 10kg 3D Printer Filament

Mayrc MR-PETG 3D Printing Materials 1.75 mm Cost-effective Printer Consumables White 1kg 10kg 3D Printer Filament Specification:  Model No MR-PETG Cable Net Weight 1kg/roll Color White Nozzle Temperature 230-260℃ Bed Temp 70-80℃ Print Speed 30-60mm/s Bed Glass,PEI Film or Coating PVP Glue   Cooling fan speed ＜50% Cable Size 1.75mm Feature High gloos Recommended support material MAR™ MR-PVA Recommended Nozzle Diameter 0.2-1.0mm Raft separation distance 0.18-0.25mm Retraction distance 2-5mm Retraction speed 1800-3600 mm/min   Notice:The bonding between MR-Tough-PET and the PC bottom plate is very strong. When printing a larger bottom surface, the distance between the first layer of the model and the bottom plate can be appropriately adjusted. Product Description: PETG is a 3D printing material with excellent comprehensive performance, not easy to draw, low warpage, stable size, and very cost-effective Product Advantages： 1.Balanced mechanical properties PETG has excellent toughness and strength, and the mechanical properties in the XYZ axis direction are very close, and there is no anisotropy 2.Excellent heat resistance PETG has a heat distortion temperature above 70 degrees Celsius, which can replace PLA in applications where a certain degree of heat resistance is required 3.High light transmittance Thanks to PETG being a non-crystalline copolyester, its products have excellent optical properties, and the light transmittance is close to that of acrylic. Combined with excellent heat resistance. PETG is very suitable for the application of luminous characters industry Material Properties: Property Testing method Typical value Density ISO 1183 1.24 g/cm³ Glass tansition temperature ISO 11357 78℃ Melt index 220℃, 2.16kg 5.6g/10min Determination of temperature ISO 75: Method A 68℃ (1.80MPa) ISO 75: Method B 72℃ (0.45MPa) Tensile strength(X-Y) ISO 527 31±0.5 MPa Young’s modulus(X-Y) 1150±108MPa Elongation at break (X-Y) 2.0±0.1 % Bending strength (X-Y) ISO 178 51.8±1.5 MPa Bending modulus (X-Y) 1990±89 MPa Charpy impact strength （X-Y） ISO 179 4.5±0.9KJ/㎡ Specimens printed under the following conditions: Nozzle temp 300°C, Bed temp 80℃, Print speed 45mm/s, Infill 100%, Infill angle ±45° Disclaimer: The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End- use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice. Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Mar materials for the intended application. Mar makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Mar shall not be made liable for any damage, injury or loss induced from the use of Mar materials in any application.