Audix R61KIT Wireless Component Microphone WIRELESS,R61 RECEIVER 522-586 MHz

Description Audix R61KIT Wireless Component Microphone WIRELESS,R61 RECEIVER 522-586 MHz The Audix R61KIT is a Performance Series single-channel UHF diversity receiver that is professionally designed for delivering an enhanced range and easy configuration for presenters, musicians, public speakers, and vocalists in conferences, houses of worship, live stage, and concert venues applications. The Audix R61KIT is offering 207 pre-coordinated frequencies across 64 MHz of bandwidth in the 522 to 586 MHz frequency band. Use one wireless microphone (available separately) from up to 300' away. Auto scan functions and one-touch sync are providing a efficient and simple setup. The high-contrast LCD is showing a host of information such as battery level, frequency, and AF/RF signal strength, which can be optimized using the adjustable AF and RF gain. XLR and 1/4" outputs are allowing the compatible connectivity with the balanced or unbalanced inputs on your mixing console. The Audix R61KIT ships with two antennas, two BNC cables, a carrying case, an audio cable, one power supply, and a rackmount kit. Single-channel receiver supports one wireless microphone 64 MHz wide spectrum tuning 207 pre-coordinated frequencies 2560 tunable frequencies High-contrast LCD shows RF and AF signal strength, group/channel/frequency, level/squelch, battery level, and more One-touch sync via infrared One-touch scan eliminates inefficient manual tuning Ground-lift switch helps eliminate ground loops or hum Metal strain relief for power cable Adjustable AF and RF level Selectable receiver lock disables the scan, sync, and power buttons Selectable transmitter lock prevents the transmitter from being accidentally muted or powered off Allows front- or rear-mount antenna configurations Specifications Frequency Band 522 to 586 MHz Bandwidth 64 MHz # Of Simultaneous Systems Up to 24 Switchable Frequencies 207 pre-coordinated frequencies Reception Frequencies 2560 tunable frequencies (spaced 25 kHz apart) Wireless Range Up to 450' / 137 m Antenna Connector 2 x BNC (8 VDC, 150 mA) Outputs 1 x XLR 3-pin balanced1 x 1/4" TS unbalanced Audio Output Level XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain Audio Level Control -12 to +9 dB in 3-dB steps Frequency Response 45 Hz to 18 kHz Compander 2:1 Pilot Tone 32 kHz Receiving System Dual tuner, true diversity Signal to Noise Ratio 112 dB at 30 kHz deviation (A-weighted) Total Harmonic Distortion (THD) <0.4% (33 kHz deviation at 1 kHz) Sensitivity 5 dBµV (S/N 60 dB at 25 kHz deviation, A-weighted) Power Requirement 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A Enclosure Material Metal Dimensions (W x D x H) 8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm Weight 2.4 lb / 1.1 kg