Audix AP41SAXA, Diversity Receiver, B60 Bodypack with ADX20i Clip on Condenser Microphone

Descriptions Audix AP41SAXA, WIRELESS,R41,BODY PACK, W/ADX20I, R41 Diversity Receiver, B60 Bodypack with ADX20i Clip on Condenser Microphone The Audix AP41SAXA feature its performance series with a single-channel instrument wireless system from Audix. The Audix AP41SAXA has includes the R41 1-channel diversity receiver, B60 bodypack transmitter and ADX20i clip-on cardioid condenser microphone for saxophone, trumpet and brass instruments. The R41 receiver in Audix AP41SAXA operates on a frequency range of 522 to 544 MHz and offers one-touch auto scan searches for clear channel. A big thanks to the one-touch sync function of the Audix AP41SAXA, it can easily links to the B60 bodypack transmitter placed within 300'. The ADX20i microphone connects to the bodypack transmitter via its mini XLR-terminated cable. Designed for stage, broadcast and recording, the microphone handles high SPLs and provides natural sound reproduction at very close distances. This lightweight, compact, and easy to use microphone features a shock mounted clip to help reduce noise and vibration. The spring tension clip makes for easy mounting on the bell of an instrument, and a flexible gooseneck allows for precise positioning. Also, the Audix ADX20i is a microphone that connects to the bodypack transmitter via its mini XLR-terminated cable. The ADX20i in the Audix AP41SAXA is designed for stage, broadcast and recording, the microphone handles high SPLs and creates a natural sound reproduction at very close distances. This microphone in Audix AP41SAXA features its lightweight, compact and easy to use microphone features a shock mounted clip to help decrease noise and vibration. Also, the spring tension clip designed for very easy mounting on the bell of an instrument and a flexible gooseneck allows for precise positioning. Audix AP41SAXA Product Features R41 Diversity Receiver- 32 MHz Wide spectrum receiver- 106 Pre-coordinated frequencies for quick, easy and reliable set up- One-touch auto scan searches for clear channel- One-touch sync links transmitter to receiver via infrared beam B60 Bodypack Transmitter- 64 MHz Wide spectrum transmitter- Durable metal housing- 14 Hour run time - AA batteries ADX20i Clip on Condenser Microphone Specifications Audix R41 Kit-A Performance Series Single-Channel UHF Diversity Receiver (A: 522 To 554 MHz) Specs Physical Frequency Band  522 to 554 MHz Bandwidth  32 MHz # Of Simultaneous Systems  Up to 16 Switchable Frequencies  106 pre-coordinated frequencies Wireless Range  Up to 300' / 91 m Antenna Connector  2 x BNC (8 VDC, 150 mA) Outputs  1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced Audio Output Level  XLR: -12 dBV at 25 kHz deviation, 600-Ohm   load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load,   +6 gain Audio Level Control  -12 to +9 dB in 3 dB steps Frequency Response  45 Hz to 18 kHz Compander  2:1 Pilot Tone  32 kHz Receiving System  Single tuner, antenna diversity Signal to Noise Ratio  105 dB at 30 kHz deviation (A-weighted) Total Harmonic Distortion (THD)  ≤0.7% (33 kHz deviation at 1 kHz) Sensitivity  5 dBµV (S/N 60 dB at 25 kHz deviation, A-   weighted) Power Requirement  100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A Dimensions (W x D x H)  8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm Weight  1.9 lb / 0.9 kg   Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs Physical RF Power Output  10/30 mW Bandwidth  64 MHz Gain Adjustment  0 dB, -6 dB, -12 dB, -24 dB Inputs  1 x mini-XLR 3-pin Input Impedance  Mic: 10 kOhms Line: 1 MOhm Maximum SPL  Approximately 128 to 140 dB (depending on   microphone) Battery Life  Approximately 14 hours Current Consumption  110 mA typical Power Requirement  2 x AA 1.5 V batteries Dimensions (W x L x D)  2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm Weight  3 oz / 85 g without batteries   Audix ADX20I Cardioid Condenser Instrument Microphone<span> </span>Specs Microphone Capsule  Condenser Polar Pattern  Cardioid Pad  None Performance Frequency Range  40 Hz to 20 kHz Maximum SPL  130 dB SPL Impedance  250 Ohms Signal-to-Noise Ratio  65 dB Connectivity Output Connectors  1 x TA3M 3-Pin Power Operating Voltage  9 to 52 V (Phantom Power) Physical Dimensions  ø: 0.47 x L: 1.14" / ø: 12 x L: 29 mm Weight  1.7 oz / 4.7 g