Audix AP61SAX, WIRELS,R61,HH, W/ADX20I 522-586MHz, R61 True Diversity Receiver, B60 Bodypack with ADX20i Clip on Condenser Microphone

Descriptions Audix AP61SAX, WIRELS,R61,HH, W/ADX20I 522-586MHz, R61 True Diversity Receiver, B60 Bodypack with ADX20i Clip on Condenser Microphone The Audix AP61SAX feature its professional true diversity wireless system featuring the ADX20i clip on cardioid condenser for sax, trumpet and brass instruments. The ADX20i in the Audix AP61SAX handles high sound pressure levels and provides natural sound reproduction at very close distances. The Audix AP61SAX also features a lightweight, compact and easy to use ADX20i features a shock mounted clip to help reduce noise and vibration. The spring tension clip on the Audix AP61SAX makes for easy mounting on the bell of an instrument, and a flexible gooseneck allows for precise positioning. A single space rackmount kit with BNC cables for front mounting antennas is included. Optional accessories include rackmount kit for mounting two systems in one rack space, active directional antennas and antenna distribution system for up to four systems (4 channels) Audix AP61SAX Product Features R61 True Diversity Receiver- 64 MHz Wide spectrum tuning receiver- 207 Pre-coordinated frequencies for quick, easy and reliable set up- One-touch auto scan searches for clear channel- One-touch sync links transmitter to receiver via infrared beam- 2560 tunable frequencies B60 Bodypack Transmitter- 64 MHz Wide spectrum transmitter- Durable metal housing- 14 Hour run time - AA batteries ADX20i Clip on Condenser Microphone Specifications Audix R61 Kit Single-Channel Wireless True Diversity Receiver (522 To 586 MHz) Specs Physical Frequency Band  522 to 586 MHz Bandwidth  64 MHz # Of Simultaneous Systems  Up to 24 Switchable Frequencies  207 pre-coordinated frequencies Reception Frequencies  2560 tunable frequencies (spaced 25 kHz apart) Wireless Range  Up to 450' / 137 m Antenna Connector  2 x BNC (8 VDC, 150 mA) Outputs  1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced Audio Output Level  XLR: -12 dBV at 25 kHz deviation, 600-Ohm   load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load,   +6 gain Audio Level Control  -12 to +9 dB in 3-dB steps Frequency Response  45 Hz to 18 kHz Compander  2:1 Pilot Tone  32 kHz Receiving System  Dual tuner, true diversity Signal to Noise Ratio  112 dB at 30 kHz deviation (A-weighted) Total Harmonic Distortion (THD)  <0.4% (33 kHz deviation at 1 kHz) Sensitivity  5 dBµV (S/N 60 dB at 25 kHz deviation, A-   weighted) Power Requirement  100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A Enclosure Material  Metal Dimensions (W x D x H)  8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm Weight  2.4 lb / 1.1 kg   Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs Physical RF Power Output  10/30 mW Bandwidth  64 MHz Gain Adjustment  0 dB, -6 dB, -12 dB, -24 dB Inputs  1 x mini-XLR 3-pin Input Impedance  Mic: 10 kOhms Line: 1 MOhm Maximum SPL  Approximately 128 to 140 dB (depending on   microphone) Battery Life  Approximately 14 hours Current Consumption  110 mA typical Power Requirement  2 x AA 1.5 V batteries Dimensions (W x L x D)  2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm Weight  3 oz / 85 g without batteries Audix ADX20I Cardioid Condenser Instrument Microphone<span> </span>Specs Microphone Capsule  Condenser Polar Pattern  Cardioid Pad  None Performance Frequency Range  40 Hz to 20 kHz Maximum SPL  130 dB SPL Impedance  250 Ohms Signal-to-Noise Ratio  65 dB Connectivity Output Connectors  1 x TA3M 3-Pin Power Operating Voltage  9 to 52 V (Phantom Power) Physical Dimensions  ø: 0.47 x L: 1.14" / ø: 12 x L: 29 mm Weight  1.7 oz / 4.7 g