Dynacord L1300FD 2-Channel 650W DSP Power Amplifier
Professional DSP amplifier for live and mobile application Fully integrated professional speaker processing with FIR drive technology Market-leading acoustic performance and rock solid reliability Intuitive, simplified set-up, control and operation in SONICUE sound system software with firmware 2.0 Dynacord L Series are professional dual channel audio amplifiers for live and mobile applications. Integrated digital signal procesing provides access to professional speaker processing with FIR Drive technology. L Series amplifiers utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of mobile applications. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision. Specifications Load Impedance: 2, 2.6, 4, 8 Ohms Maximum Output Power, Single Channel: 2 Ohm = 1100W 2.6 Ohm = 950W 4 Ohm = 660W 8 Ohm = 350W Maximum Output Power, Dual Channel: 2 Ohm = 1000W 2.6 Ohm = 850W 4 Ohm = 600W 8 Ohm = 320W Maximum Output Power, Bridged: 4 Ohm = 2000W 8 Ohm = 1200W Maximum RMS Voltage Swing, THD = 1%, 1kHz: 55.3 V Voltage Gain ref.1 kHz: 32.0 dB IMD-SMPTE, 60 Hz, 7 kHz: < 0.1% DIM 30: < 0.05% (3.15 kHz, 15 kHz) Maximum Input Level: +21 dBu Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4Ω) Frequency Response: 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced: 20kΩ Signal-to-Noise Ratio (A-weighted): > 104 dB Output Noise , A-weighted: < -68 dBu Output Stage Topology: Class AB Power Requirement: 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption: 550 W (Maximum Output Power @4Ω) Protection: Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, In rush current limiters, Turn on delay Cooling: Front-to-rear, 3-stage-fans Safety Class: I Available Color: Black Dimensions (H x W x D): 3.46" x 19.02" x 18.2" (88 x 483 x 462.4mm) Weight Net: 28.44 lbs. (12.9 kg) Signal Processing: FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance Mains Fuse: 240 V/230 V: T10AH; 120 V/100 V: T20AH Operating Temperature Range: 40°F to +105°F (+5°C to +40°C) Total Harmonic Distortion: < 0.05% (at 450 W/4Ω MBW = 80 kHz, 1 kHz)