AIMS Power 2000W Gas Generator CARB/EPA Compliant GEN2000W120V

Portable yet powerful - Starting capacity of 2000 Watt max 16.6A and continuous rating of 1900 Watt 15.8A with four-stroke OHV engine CARB compliant – Meets the California Air Resources Board’s strict air pollution regulations Clean pure sine inverter power - Makes it suitable for sensitive electronics as well as all kinds of appliances and devices Ultra quiet – 51.5-54 dBA depending on location and load – Makes it ideal for emergency backup power 5 hour run time @ 50% load – Reliable, economical power. Can also be used as back up for solar panels during extended periods when the sun doesn’t shine Convenient carry handle for easy to transport – Weighing 50 lbs., this generator is portable enough to keep in any vehicle, RV or commercial vehicle. Suitable for boats as well as for camping adventures, tailgating and a host of other uses. Auto generator start feature that works seamlessly with the AIMS inverter chargers - Due to its auto gen start capability, this generator is a perfect back up power source to inverter/battery power system. Its proprietary auto gen start feature enables the AIMS inverter to auto start the generator if the inverter’s battery voltage drops. Packed with features such as Range of power options - 2 USB outlets, DC 12V output, and a resettable GFCI outlet Over-current and short-circuit protection with DC/AC resettable breakers Both electric starter and recoil starter – We have included the lithium battery with this generator for electric starter. Electric start system powered by the included lithium battery makes this generator a cinch to start. LED indicators for oil, overload and AC Economy switch lets you opt for even greater fuel savings and quieter operation DC protect switch to protect generator from overloading AC protect switch Ground terminal Easy-to-read Voltmeter, amp meter, KW meter, Hz meter Remember when considering an inverter generator, it is important to add up the running and starting watts of all devices needing power and then size the generator using the starting watts Specifications Generator Type: Inverter Generator Maximum Power: 2000 W max 16.6A Rated Power: 1900W continuous 15.8A Frequency: 60Hz AC output: 120V 20 amp GFCI outlet DC output: 12V 4A outlet USB Outlets: 2 Output: Pure sine power inverter works with sensitive electronics, <5% THD CARB Compliant: Yes EPA Compliant: Yes Protection: Overload shutdown, Low oil shutdown, DC protect switch, AC protect switch, DC/AC resettable breakers for over-current and short-circuit protection. Noise Level: Ultra quiet – 51.5-54 dBA depending on location and load Run Time: 5 hour run time @ 50% load Dimensions: 20.66″L x 11″W x 17.32″H Weight: 50 lbs. Starting: Electric starter (includes battery) and Recoil starter Economy control switch: Yes. For more efficient fuel consumption and quieter operation. LED indicators: Yes. For oil, overload and AC. Meters: Easy-to-read voltmeter, amp meter, KW meter, Hz meter Ground Terminal: Yes Carry Handle: Yes Engine Fuel: Unleaded Gasoline Fuel Tank Capacity: 1 gal Engine: 4 stroke OHV 114 cc 4500 rpm Oil: SAE 10W30 Ignition: CDI Spark plug: A5RTC Click to view User Manual - 2000 Watt Portable Pure Sine Inverter Generator CARB/EPA Compliant  Package Contents Portable Generator Lithium battery for electric start function 12V DC alligator clips Screwdriver Spark plug tool Manual Warranty 3 Years Limited Warranty by the Manufacturer. Please refer below for more details on manufacturer's warranty - All AIMS Power™ products come with warranty coverage against manufacturer defects as follows, from the date of purchase, unless otherwise indicated.  1-Year for non ETL (Extract, Transform and Load) units 2-Years for ETL (Extract, Transform and Load) units and batteries 3 Years for generators Batteries – product specific Solar products – product specific Cables - 10 years Within the warranty coverage period, AIMS Power™ will either repair or replace, at its sole discretion, the defective product. A restocking fee may be applied if used or missing packaging and/or parts are not returned. Limited and prorated warranties on some products. Any shipping charges that occur as a result of a warranty return or exchange are NOT covered by the warranty and are the responsibility of the customer. The warranty does not cover the following: Products that AIMS Power™ determine, in its sole discretion, to be free of any material or workmanship defects or flaws Products evidencing excessive wear, misuse or alteration Products with missing or defaced labels, stickers, or other identifying information Improper care or storage (e.g. water damage, exposure to extreme heat or cold temperatures, unsanitary environment) Alterations or customizations Items that were purchased second hand, or from an unauthorized seller Items outside of the covered warranty period Warranty Return ProcessIt is our goal at AIMS Power™ to provide a comprehensive and hassle-free return and exchange process. As such, please review the below process before initiating warranty claim. Contact AIMS Power™ via phone or email to submit your warranty return request and obtain a Return Merchandise Authorization (RMA) number. Note: Be sure to provide the name from the original order as well as a copy of your receipt. Include a detailed description of the problem. An automated email will then be sent to the address indicated on the warranty return request containing further instructions regarding packing, shipping and documentation to include when returning the product as well as an RMA authorization number. Once the return is received and inspected an e-mail will be sent informing you that the return has been approved and processed. If there are any issues with the return, an additional e-mail will be sent notifying you of such. Other Items of note: AIMS Power™ DOES NOT cover return shipping. Any Product that is returned and deemed to be of working condition or was returned without all of the required information, and the customer has not paid for return shipping, may be disposed of or destroyed after 90 days. Any requested information that is not provided in a timely manner could result in delayed processing of your return. When shipping the product for a return: Ensure the product is packed accordingly to avoid being damaged in-transit. Include original packaging. Use proper protective material to ensure package arrives without damage. Ensure some form of shipment tracking is used. It is strongly recommended to insure the shipment. AIMS Power™ is not liable for products that are lost or damaged in-transit. The RMA authorization email will indicate what, if any, other product contents need to be sent in with the returned product. For any other questions please contact us via phone or email.