1 1/2" Y-Strainer 80 Mesh with Crimped Drain Hose Assembly and PVC Ball Valve

     Polypropylene Y-Strainer 1 1/2" FPT ports 316 Stainless Steel 80 mesh EPDM seal 150 PSI Maximum 11.5" x 8" with a minimum of a 3' long (Red, Blue, or Yellow) 3/4" ID Flex Tech RT hose with two crimped PVC ends and a 1" Grey PVC ball valve.      The drain hose assembly installed into the top port of the bowl will allow you to clean out the filter without removing the bowl, clean your hands and fill a bucket with water.      We will supply you with either a red, yellow, or blue hose at least 3' long.      Water filter for 8 GPM and greater pressure washers. This filter and hose kit is included in the PL-8-TO and PL-8-TA kits.      Please do NOT forget to add the 1.5" hose barbs and the special 3/4" to 1.5" hose barb to help you properly plumb this filter.  ***Supply/suction hose inner diameter (ID) should be doubled compared to the pump Inlet/suction port. For example, the general pump TSF 2021 has 3/4" Inlets located on either side of the bottom manifold of the pump. The pump shoul