Happymodel Crux35 Analog ELRS V2 2.4GHz 4S with Caddx Ant Camera Micro Freestyle FPV Drone - BNF
CRUX35 is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog version. The Crux35 drone uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience. The analog version is equipped with CADDXFPV Ant ant camera. The receiver version is the UART ExpressLRS ( SPI version is discontinued ) Recommended (Not Included): Battery 4S 14.8v 750mAh to maximum 1100mAh. You can choose from our Compatible 4S Lipo Packs here Check out The HappyModel Crux35 Frame and Parts Collection, all our Analog BNF Drones and the rest of our Happymodel Products! Features Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone Integrated ExpressLRS UART receiver High efficiency EX1404 power system Can be equipped with Naked Gopro or SMO4K Support 3-4S battery 4S 750mah battery is recommended, maximum support 4S 1100mah Specifications Wheelbase: 150mm Weight: Crux35 87gram Size: 130mmx130mmx45mm(without propellers) Receiver: UART ExpressLRS 2.4GHz Caddx Ant Camera +OVX303 or OVX306 VTX Flying time: 9min~15min 4s 750mah battery Motor Model: EX1404 KV options: KV3500 Configu-ration:9N12P Stator Diamter:14mm Stator Length:4mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ15mm*15mm Weight(g):9g Propellers Propeller Diameter: 3.5 inch Pitch : 2 Blades : 3 Material : Poly Carbonate Weight : 1.5g Hub Diameter : 10mm Hub Thickness:4.7mm Shaft :1.9/1.5/1.9mm Adaptor Rings : NO Flight controller (UART ELRS Version) CrazybeeF411 ELRS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM42688P or BMI270 (SPI Control) Mount pattern: 25.5×25.5 M2 Size:32*32*5mm Power supply: 2-4S Lipo battery Built-in 20A Blheli_s ESC each Built-in Betaflight OSD(SPI Control) Built-in UART ExpressLRS 2.4GHz receiver Built-in 5V 1.5A BEC Flight controller firmware target: CRAZYBEEF4DX Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: F-H-40 Default protocol: DSHOT300 Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 (Analog version)Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.) OVX303/306 5.8Ghz VTX Model: OVX303/306 Frequency: 5.8G 40CH Transmitting Power: 0/RCE/25mw/100mw/300mw Power supply: DC 5V Current (5v): <650ma (300mw) Weight: 1.5gram without antenna Package Includes: 1 x Crux35 Frame 1 x CrazyF411 ELRS FC with UART ELRS 1 x Caddx Ant Camera 1 x Happymodel OVX303/306 5.8G analog VTX 4 x Happymodel EX1404 KV3500 brushless motor 1 x HQProp T3.5X2X3Grey (4cw+4ccw) 1 x Screw Driver 1 x Buckle Velcro for battery