Happymodel Crux35 HD ELRS V2 2.4GHz 4S Digital Runcam Link Nano Camera Micro Freestyle FPV Drone - BNF
CRUX35 is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 108g for the digital HD version. The Crux35 drone uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience. The HD version is equipped with Runcam Nano Camera and Link HD image transmission system. The receiver version is the UART ExpressLRS ( SPI version is discontinued ) Recommended (Not Included): Battery 4S 14.8v 750mAh to maximum 1100mAh. You can choose from our Compatible 4S Lipo Packs here Check out The HappyModel Crux35 Frame and Parts Collection, all our Digital BNF Drones and the rest of our Happymodel Products! Features Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone Integrated ExpressLRS UART receiver High efficiency EX1404 power system Can be equipped with Naked Gopro or SMO4K Support 3-4S battery 4S 750mah battery is recommended, maximum support 4S 1100mah Specifications Wheelbase: 150mm Weight: Crux35 87gram Size: 130mmx130mmx45mm(without propellers) Receiver: UART ExpressLRS 2.4GHz Caddx Nebula Nano Camera + Vista VTX Flying time: 9min~15min 4s 750mah battery Motor Model: EX1404 KV options: KV3500 Configu-ration:9N12P Stator Diamter:14mm Stator Length:4mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ15mm*15mm Weight(g):9g Propellers Propeller Diameter: 3.5 inch Pitch : 2 Blades : 3 Material : Poly Carbonate Weight : 1.5g Hub Diameter : 10mm Hub Thickness:4.7mm Shaft :1.9/1.5/1.9mm Adaptor Rings : NO Flight controller (UART ELRS Version) CrazybeeF411 ELRS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM42688P or BMI270 (SPI Control) Mount pattern: 25.5×25.5 M2 Size:32*32*5mm Power supply: 2-4S Lipo battery Built-in 20A Blheli_s ESC each Built-in Betaflight OSD(SPI Control) Built-in UART ExpressLRS 2.4GHz receiver Built-in 5V 1.5A BEC Flight controller firmware target: CRAZYBEEF4DX Onboard 4in1 ESC MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds) Support BLHeliSuite programmable Factory firmware: F-H-40 Default protocol: DSHOT300 Onboard UART ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHzAntenna plug: IPEX Telemetry output Power: <12dBm Receiver protocol: CRSF Default firmware version: ExpressLRS V3.0.1 (Digital HD version) Runcam Link Nano Kit Weight(camera included]: 24g Antenna: 2.3g Dimensions: Vista Kit 30×29×13mm Camera 14×14×21mm Operating Frequency: 5.725-5.850GHz Transmitter Power[EIRP]: FCC/SRRC/MIC:<30dBm CE:<14dBm Min.latencylend-to-end) 720p 60fps:32ms Max.Transmission Distance FcC/SRRC: 4km CE:0.7km lnput Power: 7.4-26.4V Power Output: 25mW/200mW/500mW/700mw Goggles : Work with DJl goggles Camera Sensor: 1/3”CMOS Lens:2.1mm,f/2.1 Shutter: Rolling shutterFOV:142°(D);122°(H);75°(V) LHCP antenna Package Includes: 1 x Crux35 Frame 1 x CrazyF411 ELRS FC with UART ELRS 1 x Runcam Link HD Nano Camera 4 x Happymodel EX1404 KV3500 brushless motor 1 x HQProp T3.5X2X3Grey (4cw+4ccw) 1 x Screw Driver 1 x Buckle Velcro for battery