QWinOut Full Set DIY FPV Drone Kit S600 4-axis Aerial Quadcopter Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 Transmitter

QWinOut Full Set DIY FPV Drone Kit S600 4-axis Aerial Quadcopter Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 Transmitter       Use Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD and 7M GPS - The board integrates with PX4FMU+PX4IO - Pixhawk is with new 32 bit chip and sensor technology Features: - Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system; - 14* PWM/ actuator output; - Bus interface (UART, I2C, SPI, CAN); - Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control; - Provide automatic and manual mode; - Provide redundant power input and fault transfer function; - Color LED lamp; - Multi tone buzzer interface; - Micro SD to record flight data; Processor: - 32 bit 2M flash memory STM32F427  Cortex M4, with hardware floating point processing unit - Main frequency: 256K, 168MHZ RAM - 32 bit STM32F103 backup co processor Sensor: - L3GD20 3 axis digital 16 bit gyroscope - LSM303D 3 axis  14 bit accelerometer /magnetometer - MPU6000 6 axis accelerometer / magnetometer - MS5611 high precision barometer Interface: - 5* UART, 1*compatible high voltage, 2*hardware flow control - 2* CAN - DSM/DSM2/DSM-X satellite receiver compatible input - Futaba SBUS compatible input and output - PPM signal input - RSSI (PWM or voltage) input - I2C - SPI - 3.3 and 6.6VADC input - External USB MICRO interface All motors and ESC has been Welded before shipping,what you need to do is assemble it and fly               S600 4-Axis Rack Quadcopter Frame Kit with Landing Specifications: Wheelbase: 600mm Weight: 590g Color: Black Rack plate thickness: 1.6mm Motor installation size: 16mm, 26mm improvement 1. Built-in power distribution board 2. Added flight control shock absorber plate         Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter iA6 Receiver Mode 2/1 Radio System Transmitter Specfications: Channels: 6 Model type: fixed-wing/glider/helicopter RF range: 2.405-2.475GHz Bandwidth: 500KHz Band: 142 RF power: less than 20dBm 2.4G system: AFHDS 2A and AFHDS Code type: GFSK Sensitivity: 1024 Low voltage warning: less than 4.2V DSC port: PS2; output: PPM Charger port: no ANT length: 26mm * 2(dual antenna) Power: 6V 1.5AA * 4 (Not included) Display mode: Transflective STN positive type, 128 * 64 dot matrix VA72 * 39mm, white backlight. Size:174 * 89 * 190mm Weight: 392g Online update: yes Color: black Receiver Specifications: Channels: 6 Channels Model type: Airplane / Glider / Helicopter Frequency range: 2.4--2.48GHZ Band width number: 140 Transmitting power: not moer than 20dBm RX sensitivity: -105dBm 2.4G system: AFHDS 2A Code type: GFSK Antenna length: 26mm Input power: 4.0-6.5V DC Dimension: 40 * 21 * 7mm Weight: 6.4g Color: Black i-Bus interface: No Data acquisition interface: No   11.1V 4400MAH 30C 3S1P Lipo Battery  xt60 Plug and Charger