Matek VTX-1G3SE / VRX-1G3-V2 1.2G 1.3G 800mw 9CH VRX - Matek System Video Transmission Receiver For RC FPV Drone Aircraft Helicopter Model Parts
SPECIFICATIONS Brand Name: TAROT-RC Origin: Mainland China Material: Metal Recommend Age: 14+y RC Parts & Accs: Connectors/Wiring For Vehicle Type: Airplanes Use: Vehicles & Remote Control Toys Certification: CE Upgrade Parts/Accessories: Adapter Remote Control Peripherals/Devices: RECEIVERS Tool Supplies: Assembly Category Quantity: 1 pcs Technical parameters: Value 10 Model Number: Matek Four-wheel Drive Attributes: Motors Wheelbase: Upper Shell 9CH_INTL version (1080,1120,1160,1200,1240,1280,1320,1360,1258MHz), SKU: VTX-1G3SE-9 2CH_US version (1258MHz & 1280MHz), SKU: VTX-1G3SE-2 RF power output: 0.1mw(0, pit mode), 25mw(1), 200mw(2), 800mw(3) CMS control via Tramp protocol variant for 1.3G Button control and LED indicators Built-in AGC microphone 6-36V DC IN (2-8S LiPo) Power Consumption: 40mA(0.1mw), 110mA(25mw), 150mA(200mw), 250mA(800mw) @12V IN Video format: NTSC or PAL Audio Subcarrier: 6.5 MHz & 6.0MHz, onboard microphone on 6.5MHz RF Connector: SMA Weight: 9g ( w/o antanna) Size: board 36*21.5mm Matek System Video Transmission Receiver Antenna 1.2/1.3ghz Ant-y1240/VTX/VRX For RC FPV Drone Aircraft Helicopter Model Parts VRX-1G3-V2: Project specifications (specifications) Band 1060-1380MHz Channel Customers 9 Channel frequency 1080/1120/1160/1200/1240/1280/1320/1360/1258 (MHz) Audio subcarrier 6.5MHz/6.0MHz Modulation type frequency modulation Frequency controlled phase-locked loop Audio subcarrier controlled phase-locked loop Frequency stability ± 100KHz (typical value) Frequency accuracy ± 200KHz (typical value) A/V ratio -26 ± 2dB Signal to noise ratio (Fo ± 3MHz)>70dBc Channel carrier error 1dB Antenna port impedance (50 ohms) Input format NTSC or PAL Video input level range: 1V ± 0.2vp-p type Audio input level range: 1V ± 0.2vp-p type Working temperature -10 ℃~+60 ℃ DC 7-28v input power supply Power output (output voltage) DC7.28V; DC5V Outline dimensions 45.5mm (L) * 35.8mm (W) * 8.4mm (H) Installation hole position 30.5mm x 30.5mm Net weight 10 grams VTX-1G3SE DC characteristics Power supply voltage 5.0V Current consumption (280 ± 40) mA Environmental regulations Working temperature -10~+65 ℃ Storage temperature -30~+85 ℃ Working humidity 85% RH Radio Frequency (RF) Receiving frequency range 1050~1380MHz *Input voltage standing wave ratio 2:1 FM/PLL demodulation system Intermediate frequency IF 480MHz ANT. Input impedance 50 Ω, typical value LO frequency stability ± 200kHz LO frequency accuracy ± 200kHz LO control PLL Input LO leakage -65dBm Receiving sensitivity -95dBm Input level range -95 dBm to+5 dBm Video Features Video output impedance 75 Ω, typical video output level 1Vp-p, typical video polarity negative Video frequency response ± 5 decibels, maximum 50 Hz~6 MHz Differential gain ± 5%, maximum value Differential phase ± 5 degrees, maximum 3dB IF broadband 16.5MHz Signal-to-noise ratio S/N 38dB, Min RSSI output voltage (-30dBm~-90dBm) 1.3-0.7V audio frequency Audio output Contact us: If you need to place a large order, you can contact us for a lower discount. And you have any questions or need help, please feel free to contact us. We will do our best to provide support. This video transmission receiver supports HDMI and HDCP protocols, with a maximum pixel clock speed of 165MHz, compressed format H.264, and maximum video resolution of 1920x1080 at 60Hz. The HDMI connector is type-A with an impedance of 1000 ohms, and we recommend using cables shorter than 5 meters when transmitting at the maximum resolution. Additionally, this device features a 3.5mm IR port with unidirectional digital IR transmission frequency ranging from 20-60 kHz.