AlphaBot Chassis Kit for Raspberry Pi

Description AlphaBot Chassis kit with Raspberry Pi and Camera Get started with robotic development rapidly Experiment with line tracking, obstacle avoidance, speed measuring, IR control Comes with everything needed for assembly Connect your robot to your smartphone with the downloadable App The AlphaBot Chassis Raspberry Pi Kit (Raspberry Pi and Camera) comes with Raspberry Pi 3 Model B, AlphaBot robotic platform (line tracking, obstacle avoidance, speed measuring, IR control), and a camera (with servo and 2 DOF pan head). With modules in the kit, you can get started with robotic development rapidly; like line tracking, obstacle avoidance, IR remote control, and video monitoring via network, etc. What's more, thanks to the rich Raspberry Pi open source resources, and the modular design of AlphaBot, you'll learn how to extend and refit, and finally build your own Raspberry Pi robot. View more What's Included AlphaBot mainboard x1 Tracker Sensor x1 Photo Interrupter Sensor x2 Infrared Proximity Sensor x2 Motor with gearbox 2PCS x1 AlphaBot wheel 2PCS x1 AlphaBot acrylic chassis x1 Motor mounting plate 4PCS x1 omni-direction wheel x1 20-slots encoder disk 2PCS x1 IR remote controller x1 XH2.54 4cm 4Pin 2PCS x1 XH2.54 4cm 3Pin 2PCS x1 XH2.54 4cm 7Pin x1 AphaBot screws x1 Additional Parts in the Kit Raspberry Pi 3 Model B x1 RPi Camera (B) x1 SG90 servo x2 2 DOF pan and tilt kit x1 15PIN FFC 25cm x1 Micro SD Card 16GB x1 Power Adapter US Standard 5V 2.5A USB Output x1 Micro SD Card Reader x 1 (Extra Free) USB type A plug to micro B plug cable x1 Specifications 1. Raspberry Pi interface: for connecting Raspberry Pi 2. Arduino interface: for connecting Arduino 3. Motor interface 4. Ultrasonic module interface 5. Servo module interface 6. Obstacle avoidance module interface 7. Speed measuring interface 8. Battery holder: supports 18650 batteries 9. Reserved power input (not soldered): for connecting other external power supply 10. Arduino expansion header: for connecting Arduino shields 11. UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth 12. SPI interface: for connecting NRF24L01 wirmoduleeless 13. Line tracking module interface 14. TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors 15. LM298P: dual H bridge motor driver chip, up to 2A current 16. Anti-reverse diode 17. Power switch 18. LM2596: 5V regulator 19. Power indicator 20. UART switch: turn on to enable serial communication between Raspberry Pi and Arduino 21. IR receiver: control the robot remotely via infrared 22. Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals