3.5 inch Arduino TFT Display 480x320 for Mega2560

3.5 inch TFT LCD Display 320 x 480 Color Touch Screen Module Compatible with Arduino UNO R3 Mega2560   Product Description： This 3.5" color tft lcd screen is a standard display for Arduino Mega2560,320x480 HD resolution for clear display, support 65K color display,Provides an Arduino library with a rich sample program. Product Features: 3.5-inch color screen, support 65K color display, display rich colors 320x480 HD resolution for clear display Fast transmission with 16-bit parallel bus On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Support Arduino Mega2560 direct plug-in use Provides an Arduino library with a rich sample program Easy to expand the experiment with SD card slot Military-grade process standards, long-term stable work Provide underlying driver technical support Product Parameters： Display Color：RGB 65K color Screen Size ：3.5(inch) Type：TFT Driver IC：ILI9486 Resolution：480*320 (Pixel) Module Interface：16-bit parallel interface Active Area ：48.96x73.44 (mm) Module PCB Size：60.30x96.60 (mm) back light：6 chip HighLight white LEDs Operating Temperature：-20℃~60℃ Storage Temperature：-30℃~70℃ Operating Voltage：5V/3.3V Power Consumption：TBD Product Weight(Package containing)：about 49(g) Interface Definition： Number Module Pin Pin Description Number Module Pin Pin Description 1 5V Positive power supply 2 5V Positive power supply 3 DB8 8th bit of data bus 4 DB9 9th bit of data bus 5 DB10 10th bit of data bus 6 DB11 11th bit of data bus 7 DB12 12th bit of data bus 8 DB13 13th bit of data bus 9 DB14 14th bit of data bus 10 DB15 15th bit of data bus 11 DB7 7th bit of data bus 12 DB6 6th bit of data bus 13 DB5 5th bit of data bus 14 DB4 4th bit of data bus 15 DB3 third bit of data bus 16 DB2 2nd bit of data bus 17 DB1 1st bit of data bus 18 DB0 0 bit of data bus 19 RS LCD register / data selection signal Low level: register, high level: command 20 WR LCD write control signal 21 CS LCD screen select control signal, low level enable 22 RST LCD reset control signal, low reset 23 NC Undefined, reserved 24 NC Undefined, reserved 25 NC Undefined, reserved 26 F_CS SPI flash chip select control signal 27 NC Undefined, reserved 28 NC Undefined, reserved 29 NC Undefined, reserved 30 NC Undefined, reserved 31 MISO SPI bus input signal 32 MOSI SPI bus output signal 33 CLK SPI bus clock signal 34 SD_CS SD card select control signal, low level enable 35 GND Power ground 36 GND Power ground Connect to Arduino：