3.2 inch Raspberry Pi GPIO Touch Screen Display 480x320

SPI 3.2" 320x240 Touch Screen RPi GPIO Display Features 320×240 resolution Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable) Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions Drivers provided (works with your own Raspbian/Ubuntu directly) Size perfectly fits the Raspberry Pi High quality immersion gold surface plating Supports Raspbian system, Ubuntu system ,Kali Linux system Key Parameters LCD Type：TFT LCD Interface：SPI Driver IC：ILI9341 Touch Screen Type：Resistive Touch Screen Controller：XPT2046 Colors：65536 Backlight LED Resolution：320*240 (Pixel) Aspect Ratio：8:5 Active Area：48.6*64.8(mm) Dimensions：84.91*56.54(mm) Power Dissipation：0.15A*5V Rough Weight(Package containing)：54 (g) Hardware description 1.Dimensional drawing 2.Interface PIN NO. SYMBOL DESCRIPTION 1, 17 3.3V Power positive (3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 22 NC NC 6, 9, 14, 20, 25 GND Ground 11 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching 12 KEY1 Key 13 RST Reset 15 LCD_RS LCD instruction control, Instruction/Data Register selection 16 KEY2 KEY 18 KEY3 KEY 19 LCD_SI / TP_SI SPI data input of LCD/Touch Panel 21 TP_SO SPI data output of Touch Panel 23 LCD_SCK / TP_SCK SPI clock of LCD/Touch Panel 24 LCD_CS LCD chip selection, low active 26 TP_CS Touch Panel chip selection, low active