3.2 Inch MHS Raspberry Pi TFT LCD Touch Screen Display Module 320x480

Product Features Physical resolution 320 x 480, with resistive touch control It supports up to 125MHz SPI signal input, showing stable no screen and no flicker With the Raspberry Pi, the refresh rate is about 60FPS, playing video games is no problem. Support FBCP software driver, support dual screen display, can be adjusted by software to adjust the resolution Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+) Support for Raspbian/Ubuntu/Kali/Retropie systems, providing drivers and mirroring This product has passed CE and RoHS certification   Main Parameters Screen Size：3.2inch LCD Type ：TFT Module Interface：SPI (upports up to 125MHz SPI input) Resolution：320*240 (Pixel) Touch Screen Controller：XPT2046 LCD Driver IC：ILI9341 Backlight：LED Power Consumption ：0.16A*5V Operating Temperature（℃）：-20~60 Active Area：48.6*64.8(mm) Module PCB Size：84.91*56.54 (mm) Package Size：118*72*34 (mm) Rough Weight(Package containing)(g)：73(g)   Hardware Description   1.Interface Definition Pin Number Identification Description 1, 17 3.3V Power supply (3.3V power input) 2, 4 5V Power supply (5V power input) 3, 5, 7, 8, 10,22 NC Not connected 6, 9, 14, 20, 25 GND Power ground 11 TP_IRQ The touch panel is interrupted, and it is detected that the touch panel is pressed low. 15 LCD_RS Instruction/data register selection, low level is instruction, high level is data 19 LCD_SI / TP_SI LCD display / touch panel SPI data input 21 TP_SO Touch panel SPI data output 13 RST Reset signal, low reset 23 LCD_SCK / TP_SCK LCD display / touch panel SPI clock signal 24 LCD_CS LCD chip select signal, low level enable 26 TP_CS Touch panel chip select signal, low level enable 12 KEY1 Button 1 16 KEY2 Button 2 18 KEY3 Button 3   2.Product Size