Raspberry Pi MHS display 4 inch GPIO touch screen 480 x 320 TFT LCD Module

4"IPS TFT LCD Display module 480 x 320 MHS high speed touch scrren for raspberry PI Product Features Physical resolution 480 x 320, with resistive touch control It supports up to 125MHz SPI signal input, showing stable no screen and no flicker With the refresh rate of raspberry pie around 50FPS, play video to play the game without pressure Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+) Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image This product has passed CE and RoHS certification Main Parameters Screen Size：4.0inch LCD Type TFT Module Interface：SPI (upports up to 125MHz SPI input) Resolution： 480*320 (Pixel) Touch Screen Controller：XPT2046 LCD Driver IC：ST7796S Backlight：LED power consumption：0.16A*5V Working temperature（℃）：-20~60 Active Area：83.52*55.68(mm) Module PCB Size：95.5*61.0(mm) Package Size：136x98x41(mm) Rough Weight(Package containing)(g)：100(g) Hardware Description 1.Interface Definition Pin Number Identification Description 1, 17 3.3V Power positive (3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 12, 13, 15, 16 NC Not connected 6, 9, 14, 20, 25 GND Power ground 11 TP_IRQ The touch panel is interrupted, and it is detected that the touch panel is pressed low 18 LCD_RS Instruction/data register selection, low level is instruction, high level is data 19 LCD_SI / TP_SI LCD display / touch panel SPI data input 21 TP_SO Touch panel SPI data output 22 RST Reset signal, low reset 23 LCD_SCK / TP_SCK LCD display / touch panel SPI clock signal 24 LCD_CS LCD chip select signal, low level enable 26 TP_CS Touch panel chip select signal, low level enable   2.Product Size