Raspberry Pi GPIO Display 2.4"TFT LCD 320x240 Touch Screen Module

2.4"320x240 Touch Screen TFT LCD SPI RPi Display Panel for Raspberry Pi 3A+   Product Features 2.4inch standard display with physical resolution of 320×240 SPI interface with resistive touch screen for touch control perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+) Support for Raspbian/Ubuntu/Kali systems, Provide driver, image, and online wiki guidance documents This product has passed CE and RoHS certification Main Parameters Screen Size: 2.4inch LCD Type :TFT Module Interface: SPI Resolution: 320*240 (Pixel) Active Area :36.72x48.96(mm) Touch Screen Controller :XPT2046 LCD Driver IC :ILI9341 Backlight :LED Power Consumption :0.08A*5V Operating Temperature（℃）:-20~60 Module PCB Size :56.00x65.00(mm) Rough Weight(Package containing)(g) :37 (g) Hardware Description 1.Interface Definition Pin Number Identification Description 1, 17 3.3V Power supply (3.3V power input) 2, 4 5V Power supply (5V power input) 3, 5, 7, 8, 10, 12， 16，18，22 NC Not connected 6, 9, 14, 20, 25 GND Power ground 11 TP_IRQ The touch panel is interrupted, and it is detected that the touch panel is pressed low. 15 LCD_RS Instruction/data register selection, low level is instruction, high level is data 19 LCD_SI / TP_SI LCD display / touch panel SPI data input 21 TP_SO Touch panel SPI data output 13 RST Reset signal, low reset 23 LCD_SCK / TP_SCK LCD display / touch panel SPI clock signal 24 LCD_CS LCD chip select signal, low level enable 26 TP_CS Touch panel chip select signal, low level enable   2.Product Size