Skull Rock Band Super Fan Figure | 3D Printer Model Files

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL and 3MF 3D MODEL DESCRIPTION Skeleton bands only have groupies because their fans have no-body to watch the shows with. Assembling Instructions:  Take GEAR_1 and tighten the spring with your fingers as shown in the video, and place it inside BODY, fitting the outer hole of the spring onto the pin inside BODY. Fit GEAR_3 onto GEAR_2 and attach it on top of GEAR_1 so that GEAR_3 is facing downwards. From the outside, thread GEAR_8 so that the pin goes through the holes of the aligned gears on the inside. Attach GEAR_4 onto the pin of BODY. Attach GEAR_5 onto the top of GEAR_3, through the pin of GEAR_8. Place GEAR_6 on top of GEAR_4. Fit CHEST_PLATE on top of everything, aligning the pins with the holes and the slots on the side, as shown in the video. Put GEAR_7 over CHEST_PLATE, fitting it onto the first pin. Attach CHEST_ELI