Rising Phoenix Humidifier | 3D Printer Model Files

>>This is a DIGITAL DOWNLOAD | No product will be shipped | After checkout you will be provided the link to download your files. << File Type: STL 3D PRINT MODEL DESCRIPTION Rising Phoenix Humidifier | 3D Printer Model Files   What you will need: 5mm Pre Wired LED, Red DC3-5V - Amazon / Aliexpress  22awg Silicone Electrical Wire - Amazon / Aliexpress Soldering Iron Kit - Amazon / Aliexpress USB Mini Humidifier - Amazon / Aliexpress 5V 2A Micro USB Power Supply - Amazon / Aliexpress ● This STL file is recommended for FDM Printers! Approximately Height: 18.5 cm 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) ● Line Width/ Nozzle: 0.4 mm● First Layer Line Width: 0.48 mm / 120%● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s(All the other layers on Bambu Lab)● Recommended Initial Layer Height: 0.16 mm● Recommended Layer Height: 0.16 mm● Recommended Perimeters/ Walls: 3.● Recommended Infill (%): 10% (Gyroid)● Needs Support: No.● Build Plate Adhesion: Skirt. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - FOR THE WATER TANK   Line Width/ Nozzle: 0.4 mmOuter Wall: 0.70 mmRecommended Layer Height:  0.16 mmWall Loops: 3Top Shell Layers: 0Bottom Surface Pattern: Monotonic LineBottom Shell Layers: 5Speed For Outer Wall: 30 mm/sWall Overlap: 50%Infill: 0%Click with the right button to “Height Range Modifier” and set it 5 Walls from 0 to 1mm height. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.