1080p Wireless HDMI™ Extender (Loop, IR) - 330ft-WHD-PRO330-K

OREI WHD-PRO330K: Wireless HDMI extender upto 330ft Key Features: Extend full 1080p signal up to 330 feet (in line of sight) wirelessly. Perfect to send wireless HDMI signal to additional TVs around the house. Transmission distance is reduced with obstructions such as walls, floors and other wireless interference. Less than 300ms Latency time - great for home applications such a media players, cables boxes and other HDMI sources. This is not designed for gaming and real-time application use. Point to point wireless connection along with HDMI loop-out on transmitter to connect to the local TV and supports resolutions up to 1080p: HDMI 480i 60Hz, 480p 60Hz, 576i 60Hz, 576 50Hz, 720p 50/60Hz, 1080i 50/60Hz, 1080p 50/60Hz Plug & play setup without any software installation. Full band IR transmission and ability to extend (up to 3) extra receivers (sold separately) - to simultaneously connect multiple displays wirelessly to a single HDMI source. Few sample applications: This OREI WHD-PRO-330-K HDMI wireless extender enables you to transmit and extend HDMI signal up to 100 meters wirelessly. We remastered it with strong anti-interference ability by running at 5G operation frequency. It supports up to 1080p signal extension and point to point wireless connection including: HDMI 480I 60Hz, 480p 60Hz, 576I 60Hz, 576 50Hz, 720p 50/60Hz, 1080I 50/60Hz, 1080p 50/60Hz. Only 300ms of delay-latency time! Perfect for streaming this HDMI wireless extender is ideal to stream content from laptop, PC, cable, Netflix, YouTube, PS4 to HDTV/projector and it features IR support with full band IR Return 30 60 kHz. It is really a very good solution for meeting, conference, home entertainment and multi-media education. Note: The maximum distance of 330 feet is for in line of sight use with no other wireless or physical obstructions. The transmission distance is reduced with physical obstructions such as walls, floors and even with wireless interference from wireless routers or even microwave ovens. [tab] AUDIO AND VIDEO Transmitter: INPUT PORTS: HDMI Input Type A 19-pin Female OUTPUT PORTS: HDMI Output Type A 19-pin Female Receiver: INPUT PORTS: IR In OUTPUT PORTS: HDMI Output Type A 19-pin Female COMPLIANCES & PROTOCOLS HDMI Compliance HDMI 1.3a HDCP Compliance HDCP 2 EXTENDING DISTANCE 1080p@60Hz: 330 Feet VIDEO OUTPUT Video Bandwidth: 148.5MHZ Video Resolutions: 1080P/60Hz Color Space: RGB/YUV4:4:4 Color Depth: 8bit IR Controller: Yes LOOP-OUT/LOCAL PORT Has loop out port: Yes Number of Loop out ports: 1 AUDIO OUTPUT HDMI Audio Formats: PCM2.1/Dolby5.1 SIGNALS TMDS Signals: Yes DDC Signals: Yes WIRELESS PERFORMANCE & INTERFACE Transmission Type: Wireless Latency: Less than 300ms Transmission Distance: 100M/ 300 Feet (L.O.S) Maximun Pixel Clock: 12M(H.264) DIMENSIONS & WEIGHT Transmitter: Height: 26.5mm Width: 130mm Depth: 83.5mm Weight: 136g Receiver: Height: 26.5mm Width: 130mm Depth: 83.5mm Weight: 136g PROTECTION Operation Temperature: 0~45℃ Storage temperature: -10~60℃ Relative Humidity: 10%~80% ESD Protection: 4K/8K Electrostatic Protection of the whole Machine: OVP/OCP POWER Power Consumption (Max): Transmitter: 5W Receiver: 5W Power Supply: Input: 100~240V Output: 5V1A PHYSICAL PROPERTIES Color: Black Housing: Plastic Finishing: Matte PACKAGE CONTENTS 1x HDMI Transmitter 1x HDMI Receiver 1x IR receiver Probe 1x IR emitter Probe 2x DC 5V/1A power adaptor (Micro USB type) 1x User Manual WARRANTY 1-Year Manufacturer's Warranty [/tab] [tab1] FAQs The image is pixelating, what should I do? Please try the following steps to resolve your pixelating issue: - Please try replacing your current HDMI cables with High-Quality HDMI cables. - Please make sure that you dont have any other wireless devices such as wifi router nearby this extender. If you have a wifi router, then please try moving the router away as the wireless signals interfears with each other & causing this issue. Does this product supports IR Frequency or FR Frequency? Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products. I am unable to get the remote to work with IR, how to connect the IR Blaster/Emitter & IR Receiver? The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver. Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control var acc = document.getElementsByClassName("accordion"); var i; for (i = 0; i [/tab1] [shortdes] Supports 1080p up to 330 feet line of sight long distance transmission wirelessly Less than 300ms latency Supports IR Remote Control [/shortdes]