5 in 1 Class 2 Dim LED Driver 300W(Standard Size)

This waterproof ip67 led driver transformer is capable of outdoor using which has the function of water-resistant. Combines phase cut dimming and 0-10v dimming. 12V 24V led strips work perfectly with that. Model SMT-012-300VTD52 SMT-024-288VTD52 Output DC Voltage 12V 24V Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Voltage Tolerance ±0.5V Load Regulation ±1% ±1% Rated current 12.0A (3*4A) 25.0A (5*5A) Rated power 288W (3*96W) 300W (5*60W) Input Voltage Range 100-277VAC Frequency Range 47~63HZ Power Factor(Typ.)@ full load 0.99@120VAC  0.94@277VAC 0.99@120VAC  0.94@277VAC THD(Typ.)@ full load <20% Inrush Current (Typ.) 35A ,50%,960us @120VAC ;  43A,50%,1ms @277VAC Full Load  Efficiency(Typ.) 87%@120V   91%@277VAC 85%@120V   90%@277VAC AC Current(Typ.) 3.4A@100VAC 3.6A@100VAC Leakage current <0.50mA Protection Short Circuit shut down o/p voltage, re-power on to recover after fault condition is removed Over load ≤120% constant current limiting, auto-recovery Over temperature 100℃±10℃ shut down o/p voltage, automatically recover after cooling. Environment Working TEMP. -40~+60℃ Working Humidity 20~90%RH,non-condensing Storage TEM.,Humidity -40~+80℃,10~95%RH TEMP.coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz 2G 10min./1 cycle,period for 60min.each along X,Y,Z axes   Safety standards UL8750+UL1310   Withstand voltage I/P-O/P:1.88KVAC     Safety&EMC Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH   EMC EMISSION FCC 47 CFR Part 15 ,Subpart B Others Weight 1.90Kg   Size 303*78*47mm (L*W*H) packaging 10PCS/CTN 385*335*200mm     20PCS/CTN Notes 1. All parameters NOT specially mentioned are measured at 110V & 277VAC input , rated  load and 25℃of ambient temperature.   2..Tolerance:includes set us tolerance,line regulation and load regulation.    [Custom Product Tab] Input wire 18AWG Black and White to be connected to AC L and N ,Green wire go ground, Output cable 2*16AWG,Red" (+) to LED Positive side (+) , "Black"(-) to LED Negative side (-). Note: Three groups output cables. of SMT-024-288VTHW2? and five groups of SMT-012-300VTHW2 Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged. Dimming cable 2*18AWG,DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-) Please DO NOT connect ¡°DIM-¡° to ¡°LED-¡°, ¡°DIM+¡± to ¡° LED+¡± ,or other incorrect connection. Note: Output wire : Tolerance:P 0.5-2mm ¡ö?Connecting Diagram Using TRIAC/Phase cut dimming 1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system. 2.Work with forward phase /leading edge ,MLV and?reverse phase /trailing edge ,ELV,TRIAC dimmers. 3.Please try to use dimmers with power at least 1.5 times as the output power of the driver. ?Using 0-10/1-10V dimming ? [/Custom Product Tab]