DMX512 Dim CV LED drivers 100w (IP67)

SMARTS DMX512 100W led drive dimmable  is compatible with universal DMX consoles which ensures high safety standard and be used worldwide. The channel quantity can be set from 1CH to 5CH. Compatible with most lighting strip light. Model SMT-12100-XC-A SMT-24100-XC-A X=1 , 2,  3,  4,  5 for DIM (DW);  CCT(TW);  RGB;  RGBW;  RGBW+CCT (RGBCW) Output DC Voltage 12V 24V Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Rated current CH1+CH2+CH3+CH4+CH5=8.3A CH1+CH2+CH3+CH4+CH5=4.17A Rated power 100W Load Regulation ±2% Input Voltage Range 100-277VAC  Frequency Range 47 - 63Hz Power Factor(Typ.@ full load PF≥0.98/ 230VAC  (Full loading) THD(Typ.)@ full load <15% Efficiency(Typ.)@ full load 89% @230VAC 89%@230VAC AC Current(Max.) 1.3A 1.3A Inrush Current (Typ.) 48.5A,164us@50%Ipeak Leakage current <0.5mA  Protection Short Circuit Hiccup mode, recover automatically after fault condition is removed Over Load ≤120% ,hiccup model, recover automatically after fault condition is removed Over temperature ≤100℃±10℃, shutdown output voltage, recover automatically after temperature drop Protection Class II Environment Working TEMP. -40~+60℃ (see below derating curve) Working Humidity 20 - 95%RH ,non-condensing  Storage TEM.,Humidity -40 - +80℃,10 - 95%RH TEMP.coefficient ±0.03%/℃(0 - 50℃) Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes  Safety&EMC   Safety standards EN61347-1   EN61347-2-13 (EU)   &  UL8750  UL1310 (US) Withstand voltage I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC (EU) & I/P-O/P:1.5KVAC(US) Isolation resistance I/P-O/P:100MΩ/500VDC/25℃/70%RH   EMC Emission EN55015   EN61000-3-2  EN61000-3-3 (EU)  &  FCC Part 15 B (US) EMC Immunity EN61000-4-2,3,4,5,6,11      EN61547 Others Net Weight 0.90KG Dimension 230*78*25mm (L*W*H) packing 10PCS/CTN    Notes 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature. 2. Tolerance: includes set up tolerance, line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again. [Custom Product Tab] ※Input Rubber cable 3*1.0mm²(VDE approval), the Y/G cable connect with (FG) , Brown with AC (L), Blue with AC(N) (EU) Input SJOW Rubber cable 3*18AWG (UL approval), the green cable connect with (FG) ,Black with AC (L), White with AC(N) (US)※Dimming cable: Purple (D+), Brown (D-) and Gray (GND) connect to DMX dimmer / system.※Output cable to be connected to LED Light; DIM (DW) dimming: Rubber cable Black is output ( V+) Positive, White is output (V-) negative CCT (TW) dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG Black is output ( V+) Positive, While (CW-) and Yellow (WW-) are output (V-) negative RGB dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG Black is output ( V+) Positive, Red (R-), Green (G-) and Blue (B-) are output (V-) negativeRGBW dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG Black is output ( V+) Positive, Red (R-), Green (G-) ,Blue (B-) , White (W-) are output (V-) negativeRGB+CCT dimming: 1015 electronic cable , (V+) 16AWG; (V-) 18AWG Black is output ( V+) Positive, Red (R-), Green (G-) ,Blue (B-) , White (CW-) and Yellow (WW-) are output (V-) negative.;※Please make sure you connect these correctly ,otherwise your product will not work correctly and could be damaged.Note: there is external antenna at output side. Don't disassemble! ■ DMX512 address setting Operation ※The default address for the DMX driver is 001.※Address settings device: ※Address settings:① RDM setting address:Set the address by the RDM device. For detailed operation, please refer to RDM device instruction manual. ② NFC setting address:The DMX address can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver. ■ Adjust output voltage Operation ※Adjust output voltage slightly for DMX512 driver1) The driver output voltage can be read and written by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) by close to the NFC signal area of the DMX512 driver. 2) Voltage range: level 1~10, each level is 0.2V. The default output voltage level is 5. Such as SMT-24030-XC-P, default is level 5 corresponding to 24V. By adjusting output voltage slightly, you could get 23.2v to 25V freely. ■ See figure below Simple operation about DMX512 address reset and adjusting output voltage slighting by a mobile with Easy NFC APP or NFC handheld device (NFC read & write device: NFC-RW) [/Custom Product Tab]