ELV/Triac Dimmable J-BOX Electronic Transformer 192W

120VAC input 192W triac dimming led electronic transformers, dimming range 0-100%, ultra-low load requirements, to work perfectly at 20-100% load requirements, UL certified for use in North American residential lighting and commercial lighting projects Model Number SET-24192J Output Type Reted Power 96W * 2 Reted Voltage 24V Reted Current 4A * 2 Voltage Tolerance ±0.5V Voltage Regulation ±0.5% Load Regulation ±1% Input Type Voltage Range 120V Frequency Range 47-63HZ Efficiency(Typ.) 87%@120VAC Total Harmonic Distortion THD< 20%(@100% load) Power Factor(typ.) 0.98@120VAC AC Current(Typ.) 1.86A Inrush Current(Typ.) - Leakage Current <0.5mA/ 120VAC PROTECTION Short Circuit Hiccup mode, recovers automatically after fault condition is removed. Over Load Hiccup mode, recovers automatically after fault condition is removed. ENVIRONMENT Working Temp. Tcase=-40 ~ +60 (Please refer to“OUTPUTLOAD vs TEMPERATURE”section) Working humidity 20 ~ 95% RH non-condensing Storage temp., Humidity -40 ~ +90, 10 ~ 95% RH Temp .coefficient ±0.03%/℃(0~50℃) Vibration 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes SAFETY & EMC Safety standards UL8750, Class 2 Safety standards I/P-O/P:1.88KVAC OTHERS Dimension 6.22x4.74x1.65 inch (L*W*H) Packing - [Custom Product Tab]  Mounting 1.This driver must be installed in a well-ventilated area free from explosive gases and vapors. Air circulation is essential for heat dissipation. 2.Recommended spacing between LED drivers should be a minimum of 4” (10cm). 3.Do not mount driver close to or above objects that can radiate heat. Vertical mounting is highly recommended. 4.Select an appropriate location that is able to support the weight of the product. 5.Use the mounting tabs on the left and right side of the driver to mount the product. ConnectionPreparation InputConnections & Grounding OutputConnections Wiring Diagram [/Custom Product Tab]