1.5oz good time shot glasses

SHOT GLASS (1.5oz) SUBLIMATIONMETHOD 1 - IN A CONVECTION OVEN (using shrink wrap)Supplies needed:- sublimatable substrate (Shot Glass)- sublimation transfer- shrink wrap- heat gun (to pre-shrink the shrink wrap onto the Shot Glass)- Fan for cooling (DO NOT PUT IN WATER THE GLASS WILL CRACK)Oven settings:- temperature - 400 degrees F if using a convection oven (recommended).- dwell time - 6:00 - 8:00 minutes (depending on the oven type)- The recommended settings above may need adjustments for best results.Settings will vary depending on the oven brand and model ink and paper andatmospheric conditions.- Convection ovens are recommended over traditional ovens for evendistribution of heat.- Preheat the oven to 400 degrees F before placing the shot glass into theovenSteps:1. Position the substrate onto the transfer.2. Tape two ends of the transfer. Make sure to start and end the transfer inbetween where the white area starts and ends.3. Place the substrate and transfer into the shrink wrap