Pascal w/ Marani PDA500P3 3-Channel Power Amplifier AUTHORIZED DEALER!!!

Pascal w/ Marani PDA500P3 3-Channel Power Amplifier AUTHORIZED DEALER!!!  Power & Amplifier section Number of Channels 3 Max Output Power @ 8 ohms 3 x 250W or 1 x 1000W (Bridge)+1x250W Max Output Power @ 4 ohms 3 x 500W or 1 x 1000W (4Ω BTL Mode selected) + 1x500W Output Circuitry Class D - full bandwith PWM modulator with ultra low distortion Output Voltage +/-70 V (SE Mode unloaded) / Bridged +/-140V(BTL Mode unloaded)  THD @ Rated power 4Ω (1kHz) <0.005% (20 Hz - 20 kHz, 8Ω load, 3dB below rated power) Signal To Noise Ratio >120 dB (A-weighted, 20 Hz - 20 kHz, 8Ω load) Frequency Response 20 Hz - 20 kHz ± 0,15 dB (8Ω load, 1 dB below rated power) Damping Factor >1000 (8Ω load, 1kHz and below) Power Supplies Switch mode power supply with PFC (Power Factor Correction) and integral standby converter Operating Range Universal Mains, 85-265V Consumption / Current draw and Thermal dissipation @ 230 V 13W / -A / 44.3 BTU/h (Idle)   173W / -A / 143.4 BTU/h (I/8 max. power@4Ω)     Protections Over-Current, Over/Under Voltage, Output DC and Over-Temperature, Short Circuit Protection Analog Input 1 x XLR electronically balanced, +12dB Analog Output 1 x XLR electronically balanced (Link) AD & DA Converters 24bit Frequency Response (DSP) 20 Hz - 20 KHz; -0.5dBu at 20 Hz and 20 kHz DSP & Processing DSP Engine MARANI® DSP DSP Resolution 24bit (data) x 24 bit (coeff.),54bit accumulation registers,  96 bit precision on intermediate processing data Parametric Equalization 5 filters per input channel;3 filters for Low Frequency on output channel, 7 filters for Mid and High Frequency on output channel  Filter Type Bell, Low/High Shelving Variable Q Filter Gain Input from -12dBu up to +12dBu by 0.5dBu resolution stepsOutput from -12dBu up to +6dBu by 0.5dBu resolution steps Center Frequency Selectable with 1Hz resolution step from 20Hz up to 20kHz Bell Filter Q/BW Q from 0.5 up to 10 by 0.1 resolution steps Low/High Shelving Filter Q/BW Q from 0.5 up to 3 by 0.1 resolution steps Crossover Section HPF/LPF Butterworth 6/12/18/24/48dB per octave; Linkwitz-Riley 12/24/36/48dB per octave; Bessel 12/24dB per octave. Filter resolution 1HzSophisticated Dynamic Loudness function m 6dB/Octave up to -48dB/Octave including Butterworth, Bessel, Linkwitz-RileyOutput features a precision dynamic range controller composed of a RMS Compressor with selectable ratio and variable kneeAdjustable Delay time up to 40 ms for input channels, and up to 20ms for output channelsInput channel includes a Noise Gate function, Pink/White noise generator, sophisticated Dynamic Loudness function Output RMS Compressor Threshold from-18dB up to +12dBu;Knee 0~100%; Ratio from 2:1 to 100:1;Attack time from 5ms up to 500ms; Release time from 40ms up to 1000ms (10ms resolution).  Input Noise Generator White/Pink Noise, from -40dB to 0dB Slipt Band X-over(only High Band)  Freq from 5kHz to 20kHz step 1Hz resolution,slope: bypass, 1st order butterworth and 2nd order Linkwitz-Riley DLF Input: On/OffOutput: On/Off, attenuation from -6dB to 0dB, Q from 0.1 to 10 by 0.1dB resolution steps Delay 10 ms, 10.4us increment/decrement steps per channel General User Preset 8 Front Panel GAIN pot. -30dBu ~ 0dBuPRESET EQ 8 positions Rotary encoder switchRed LED (Power); Yellow LED (Link); Green LED (Signal presence)1 x XLR female connector (Input)1 x XLR male connector (Link Output)2 x RJ45 connector (M-LAN Rs485)2 x Locking PowerCON® 20A: AC Mains (blue) - AC Link (white) Dimensions 19.21“ x 3.15" x 5.98"(488x80x152mm)  Weight, Net / Shipping 6.09 lbs (2.76 Kg) / 8.83 lb (4 Kg)  ASK any questions before you buy! Or go to SpeakersAndAmps    ASK any questions before you buy! We have distributed PRO AUDIO SPEAKERS and Amplifiers for 20 years.  Go to SpeakersAndAmps We have all the other major PRO Audio Speaker Brands and Models. We have many many more than you see here.  We sell to Dealers as well.