
114 p push seal for steel strapping can be produced easily by special machine with companys logo on
114 p push seal for steel strapping can be produced easily by special machine with companys logo on 114 p push seal for steel strapping can be produced easily by special machine with companys logo on If you need make the logo on your steel push seals we will first make the design for you after receiving the logo draft The LOGO can be for steel strap clips on 19,25,and 32 metal clips the LOGO can be for steel strap clips on 19,25,and 32 metal clips All the high tensile steel materials and cold roll steel materials can be used for making the All the high tensile steel materials and cold roll steel materials can be used for making the metal clips --- high tensile metal clip machine The push seal can be proudced with logo embossed on its backside 1. Connect the power supply, make sure the running direction of the belt pulley(5) same as the arrow direction on the pulley. 2. Turn off the machine, run the machine by hand through pulley. Make the Mould(1) to the top place. 3. Feed the raw material into the machine through the feeding rolls(8) until it in the Shearing platform(7). 4. Do not turn on the machine! Produce 3-5 seals manually through the belt pulley. Make sure every seal can be pushed out. 5. Fest the feeding rolls and turn on the machine. Begin the continues work. 6. By every new feeding, repeat step 2 to 5. 7. Fixing the machine by foot steel screw