Theengs Plug - ESP32 BLE MQTT gateway, smart plug, energy consumption

Put your DIY Smart Home to the next level with this 3-in-1 cloud-free Smart Plug. The Theengs Plug can: Act as a BLE Gateway to retrieve data from more than 80 sensors Be controlled remotely Measure the energy consumption of the plugged device Theengs Plug can work with Home Assistant, OpenHAB, Jeedom, NodeRed, or any MQTT-compatible DIY Home Automation controller. Theengs Plug requires an MQTT broker to work. A beginner MQTT level is needed. Specifications: Power Supply 100-120VAC, 60Hz Max current 15A Microcontroller ESP32 WiFi Band 2.4 GHz Protocol MQTT Operating Humidity 0%～95% (No condensation) Operating Temperature 0 ºC ~ 40 ºC Storage Temperature -10°C ~ 50°C Dimensions 4.05in * 1.37in * 2.4in 103mm * 34.6mm * 61mm Compliance Hardware UL listed (E499341) Contains FCC ID 2AC72-ESPWROOM32   The plug is preloaded with OpenMQTTGateway and brings the following features: Home Assistant MQTT convention auto-discovery, BLE devices are automatically created into Home Assistant Adaptive scanning, the gateway adapts its parameters depending on the devices you have Presence detection (beta), the plug publishes presence detection information Filter list management Over the Air update   FAQ: What is the warranty period? The Theengs Plug hardware warranty is one year from the date of purchase. See details here Are you planning a plug for the European Market? Yes, we have the project of a smart plug for the European Market. Does the plug require internet access? The plug uses the internet to check if new firmware is available but does not rely on a cloud service to work (unless you configure it to connect to a cloud service). Do I have to pay customs/VAT taxes? Yes, if you are located outside of the US, you will have to pay the customs and taxes related to your country. The plug is delivered with firmware developed under GPLv3 license. By using it, you accept the terms and conditions of this license. User guide: https://tplug01.theengs.io/