WSRD 2017-2021 CAN-AM TURBO R STOCK INJECTOR TUNING PACKAGES - WS200

< The ultimate performance for your stock injector, stock turbocharger Can-Am X3!   WS200 | 2017 154HP Turbo R Models What's Included? ~ Your Choice of Flash Device: Whalen's Speed RTD or DynoJet Power Vision PV3 ~WSRD Stock Injector Calibrations - 91/93 Octane ~2018+ Turbo R/RR Fuel Pump Assembly WS200 | 2018-2021 172HP Turbo R Models What's Included? ~ Your Choice of Flash Device: Whalen's Speed RTD or DynoJet Power Vision PV3 ~WSRD Stock Injector Calibrations - 91/93 Octane   WS200 Tune Features:• Boost pressures are increase up to 17-18 PSI respectively for the octane you choose torun. Crack pressure set to 9 PSI (ensure a minimum of 5 threads exposed on the factorywastegate rod when the jamb nut is tight to ensure the actuator has enough travel tocontrol the wastegate flapper/boost)• Radiator fan activation temp lowered from ~200* F to ~165* F• Intercooler fan activation temp lowered from ~140* F to ~95*F• Torque limits for L raised to 100%, reverse raised to 75%• Component protection mode for fueling lowered to increase torque and horsepower,especially right after the pedal is floored.• Ignition timing per cylinder is optimized for maximum power as well as drive-ability,careful consideration was used not only for when at wide open throttle, but as well ascruise, throttle transitions, ect.• Throttle feel and control is thoughtfully improved, to control through a whoop section,on/off feel in short course style racing or playing in the woods, eco mode is improvedbut offers the less aggressive pedal for technical rock sections or simply loading on atrailer.• Speed limits removed, your speed limit is your rev limiter/gear• Rev limiter raised to 8900 RPM• Rough road detection is raised to max to prevent power loss.https://youtu.be/L12VDvhixlo