HKS Complete Engine RB26 2.8 High Response V-Cam

[COMPLETE ENGINE forRB26DETT 2.8L HIGH RESPONSE V-CAM] V-CAM Pro has been added to the RB28 HIGH RESPONSE ENGINE to accelerate the rise of boost pressure and further improve the response. Improved signal accuracy with a dedicated crank angle sensor for 36 teeth and a sensor for V-CAM Furthermore, the EX side cam opening is widened to 272 ° to ensure stress-free elongation up to high rpm. Reciprocating engine that is both lightweight and highly rigid with a focus on response Titanium retainer, reinforced valve spring, high lift cam, reinforced stem seal, valve system that draws power up to high rpm Crank damper that suppresses the torsional vibration of the crank while being lightweight Combustion chamber shape optimized by NC processing to suppress knocking Uses a proven large-capacity reinforced oil pump to ensure stable hydraulic pressure over the entire rotation range. * It is recommended to use HKS Racing Pro 10 W50 as the engine oil. High-rigidity lightweight piston machined from A2618 material with high high-temperature strength   Dedicated crank with counterweight reduced to the limit Dedicated lightweight pin expanded to φ22 to cope with high combustion pressure Separator that stops the outflow of oil with multiple partitions Changed to the optimum shape to suppress NC processing and knocking of thecombustion chamber * The shape that makes the best use of squish by reducing the volume of the combustion chamber as much as possible Crank angle sensor for V cam 36-2 teeth INTAKE: V-CAM STEP ProEXHAUST: STEP2 272 ° Specifications   HKS 2.8L KIT genuine Boa 87.0mm 86.0mm stroke 77.7mm 73.7mm Allowable rotation speed 9,000 rpm 7,600 rpm Displacement 2,771cc 2,568cc COMPLETE ENGINE RB26 2.8L HIGH RESPONSE V-CAM Camshaft IN: HKS V-CAM STEP Pro 264 ° / LIFT 10mm EX: HKS STEP2 272 ° / LIFT 10mm Cam pulley HKS SLIDE CAM-PULLEY (EX side) Timing belt HKS Fine Tune Timing Belt Sport Spring retainer HKS Titanium Product (Weight: 9.2g) Valve spring HKS reinforced product Stem seal HKS reinforced product valve IN: Genuine EX: 1mm big valve (with sodium) Valve spring HKS reinforced product Stem seal HKS reinforced product Head processing Combustion chamber machining (squish residue),sheet: beryllium / guide: phosphor bronze,stepped removal / polishing around the sheet, cam relief,water jacket air vent hole processing Head gasket HKS Grommet Super Cooling (t = 1.2) Head bolt HKS reinforced bolt Block (24U)processing content Surface grinding (correcting parallelism with the main journal),water hole processing, chamfering of deck surface holes (countermeasures against cracks),edge removal processing at the bottom of the cylinder, boring Oil pump HKS reinforced product piston HKS machined bridge structure Connecting rod HKS machined H cross section Crankshaft HKS machined full counter Main bearing bolt APR reinforced stud bolt Main bearing ACL Connecting rod bearing ACL Crank angle sensor 36-2 tooth crank direct mounting Ignition system SUPER FIRE RACING COIL Pro Crank damper ATIW / P pulley: Φ146rib belt: 4PK875,4PK910,4PK925 Covers Baking paint finish