HKS Complete Engine RB26 2.8L High Response

[COMPLETE ENGINE for RB26DETT 2.8L HIGH RESPONSE] In order to further improve the response using the 2.8 L HIGH RESPONSE KIT for RB26DETT, this engine is packaged with a crank angle sensor and an ignition coil. Reciprocating system that is both lightweight and highly rigid with a focus on response Titanium retainer, reinforced valve spring, high lift cam, reinforced stem seal, valve system that draws power up to high rpm Equipped with a crank damper that suppresses the torsional vibration of the crank while being lightweight Optimized combustion chamber shape by NC processing to suppress knocking Adopts a well-established large-capacity reinforced oil pump to ensure stable oil pressure in the entire rotation range The main bearing and connecting rod bearing are subjected to numerous tests to select the optimum one. Measures against pulling out with grommet head gasket and reinforced head stud * It is recommended to use HKS Racing Pro 10 W50 as the engine oil.  High-rigidity lightweight piston machined from A2618 material with high high-temperature strength  Dedicated crank with counterweight reduced to the limit  Dedicated lightweight pin expanded to Φ22 to cope with high combustion pressure  Lightweight crank damper that suppresses torsional vibration  Titanium valve spring retainer NC processing of the combustion chamber. Shape that makes the best use of squish by making the volume of the combustion chamber as small as possible As a result of pursuing improved response, a dedicated crank angle sensor and ignition coil are packaged. Specifications   HKS 2.8L KIT genuine Boa 87.0mm 86.0mm stroke 77.7mm 73.7mm Compression ratio (t = 1.2) 8.6 --- Allowable rotation speed 9,000 rpm 7,600 rpm Displacement 2,771cc 2,568cc COMPLETE ENGINE RB26 2.8L HIGH RESPONSE Camshaft STEP2 HKS IN: 264 ° / LIFT 10mm HKS EX: 264 ° / LIFT 10mm Cam pulley HKS SLIDE CAM-PULLEY Timing belt HKS Fine Tune Timing Belt Spring retainer HKS titanium product (Weight: 9.2g) Valve spring HKS reinforced product Stem seal HKS reinforced product valve Sheet mating port Stepped removal around the seat Combustion chamber Machining of combustion chamber (leaving squish) Head gasket HKS grommet type gasket (t = 1.2) Head bolt HKS reinforced bolt Block (24U) Processing content Water hole chemical Head bolt hole chamfering Bowling Oil pump HKS reinforced product piston HKS machined truss structure Connecting rod HKS machined H cross section Crankshaft HKS machined full counter Main bearing bolt APR reinforced stud bolt Main bearing ACL Connecting rod bearing ACL Covers Baking paint finish Other equipment Dedicated crank angle sensor, dedicated spark coil, NGK racing plug No. 9