Viking PA-IP SIP Multicast Paging Adapter with Amplifier

The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP phone systems (hardware or hosted/cloud based) and analog paging systems, eliminating the need for an ATA or FXS port. Viking PA-IP Features: Paging prioritization Plays audio from multicast SIP endpoint or multicast group member Supports up to 10 multicast paging groups Red “Page/Status” LED indicator SIP compliant Network downloadable firmware Autoprovisioning via Viking programming software Built-in high efficiency 4 watt class D amplifier Relay for activating door locks, strobe lights, external amplifiers, etc. SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive Support for access code to prevent unwanted SIP calls Line-level audio output for connecting to an external amplifier Network remote volume control Can drive additional external analog speakers for greater coverage Viking PA-IP Applications: Amplified SIP endpoint or multicast IP paging for: schools, hospitals, retail stores, office spaces, etc. Provide multicast background music and sound masking IP phone system integration with traditional analog amplifier (e.g. single zone voice paging) Viking PA-IP Specifications: Power: PoE class 3 (<13 Wats) Dimensions: 5” x 5.25” x 1.5” (127mm x 133mm x 38mm) Operating Temperature: -40°F to 140°F (-40° C to 60° C) Humidity: 5% to 95% non-condensing Audio Codecs: G711u, G722 and G711a (SIP only) Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASETX with auto cross over Sensitivity: 96dB / 1W / 1M S.P. Level Frequency Response: 55 – 18,000 Hz (+/- 10 dB) Connections: (1) RJ45 10/100 Base-T, (1) 8 position terminal block