XDB100 Ceramic Pressure Sensors (1 lot=5 pcs)

Features High safety and wide application; Excellent long-term stability; Effective temperature compensation; Operating temperature range -40 to+135℃; Directly contact the measured medium, resistant to ordinary acids(except fluoric acid). Applications Automotive; Medicine/Food; Industrial automation water; Chemical preparation; Air conditioner/Air compressor. Specifications Pressure range: 2-600bar/ 10-400barSize mm( diameter x height):Φ18X6.35, Φ13.5X6.35Supply voltage:0-30VDC,maximum(30V)Bridge Road Impedance: 11KΩ+30%Full range output: ≤2 mV/VOperating temperature: -40~135℃Storage temperature: -50~+150CLong-term stability: ≤±0.2%FS/yearTemperature drift (zero & sensitivity): ≤±0.03% FS/COverall accuracy (linear + hysteresis): ≤±0.3% FSRepeatability: ≤±0.2% FSZero offset: ≤±0.2 mV/VBurst pressure: ≥1.15-3 times range (by range)Insulation resistance≥±2 KVZero-point long-term stability @20℃: 0.25% FSRelative humidity: 0-99%Direct contact with liquid materials: 96% Al2O3lSensor weight: <7g( Non-customized products) Product Dimensions Installation & Tips The sensor is sensitive to the humidity, here are some recommendations for mounting. Before mounting, put the sensor into a drying oven with 85°C for at least 30 minutes. During mounting, make sure that the environment humidity keeps under 50%. After mounting, appropriate sealing measures should be taken to protect the sensor. The module is a calibrated product, so errors will inevitably occur during the installation process. Before use, the error caused by external factors (installation structure, other accessories, etc.) should be minimized as much as possible.