Audio-Technica AT-VM95E Dual Moving Magnet Turntable Cartridge with Elliptical Stylus

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.Features:VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusSpecifications:Cartridge & StylusFrequency Response 20-22,000 HzChannel Separation 20 (dB at 1 kHz)Vertical Tracking Angle 23°Vertical Tracking Force 1.8-2.2 g (2.0 g standard)Stylus Construction Bonded round shankRecommended Load Impedance 47,000 ohmsCoil Impedance 3.3 k ohms (1 kHz)DC Resistance 485 ohmsCoil Inductance 550 mH (1 kHz)Output Voltage 4.0 mV (1 kHz, 5 cm/sec.)Output Channel Balance 2.0 dB (1 kHz)Stylus Shape 0.3 x 0.7 mil ellipticalCantilever Aluminum pipeStatic Compliance 17 x 10 – 6 cm / dyneDynamic Compliance 7 x 10 – 6 cm / dyne (100 Hz)Mounting Half-inchCartridge Weight 6.1gDimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") DAccessories Included Two 11 mm installation screws, two 8 mm installation screws, two washersModel AT-VM95EMounting Feature Half-inch mountRecommended Load Capacitance 100 to 200 pFReplacement Stylus AT-VMN95EStylus Size 0.3 x 0.7 milType VM Stereo Dual MagnetWeight 6.1 g (0.22 oz)Wire Used for Coil T.P. Copper This item is excluded from additional discounts.