Audio-Technica AT-VM95ML Dual Moving Magnet Turntable Cartridge with Microlinear stylus

This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.FeaturesVM Series dual magnet cartridge with 2.2 x 0.12 mil Microlinear stylusAluminum cantileverDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts requiredCompatible with any AT-VMN95 replacement stylusSpecificationsCartridge & StylusFrequency Response 20-25,000 HzChannel Separation 23 (dB at 1 kHz)Vertical Tracking Angle 23°Vertical Tracking Force 1.8-2.2 g (2.0 g standard)Stylus Construction Nude square shankRecommended Load Impedance 47,000 ohmsCoil Impedance 3.3 k ohms (1 kHz)DC Resistance 485 ohmsCoil Inductance 550 mH (1 kHz)Output Voltage 3.5 mV (1 kHz, 5 cm/sec.)Output Channel Balance 1.5 dB (1 kHz)Stylus Shape 2.2 x 0.12 mil MicrolinearCantilever Aluminum pipeStatic Compliance 20 x 10 – 6 cm / dyneDynamic Compliance 10 x 10 – 6 cm / dyne (100 Hz)Mounting Half-inchCartridge Weight 6.1gDimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") DAccessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriverModel AT-VM95MLMounting Feature Half-inch mountRecommended Load Capacitance 100 to 200 pFReplacement Stylus AT-VMN95MLStylus Size 2.2 x 0.12 milType VM Stereo Dual MagnetWeight 6.1 g (0.22 oz)Wire Used for Coil T.P. CopperUPC: 4961310145996