Audio-Technica AT-VM95SP Dual Moving Magnet Turntable Cartridge Conical Stylus for 78RPM Records

This VM95 Series cartridge with 3.0 mil conical stylus fits half-inch mount turntables. While this cartridge is designed to play 78 RPM mono records, it is, nevertheless, a stereo cartridge, allowing users to choose between the left and right channels, which can be especially helpful in archiving applications to minimize noise and distortion. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.FeaturesVM95 Series dual magnet cartridge with 3.0 mil conical stylus for 78 RPM recordsAluminum cantileverDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers requiredCompatible with any AT-VMN95 replacement stylusSpecificationsCartridge & StylusFrequency Response 20-20,000 HzChannel Separation NAVertical Tracking Angle 23°Vertical Tracking Force 4.5-5.5 g (5.0 g standard)Stylus Construction Bonded round shankRecommended Load Impedance 47,000 ohmsCoil Impedance 3.3 k ohms (1 kHz)DC Resistance 485 ohmsCoil Inductance 550 mH (1 kHz)Output Voltage 2.7 mV (1 kHz, 5 cm/sec.)Output Channel Balance 1.5 dB (1 kHz)Stylus Shape 3.0 mil conicalCantilever Aluminum pipeStatic Compliance 12 x 10-6 cm/dyneDynamic Compliance 2 x 10-6 cm/dyne (100 Hz)Mounting Half-inchCartridge Weight 6.1gDimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") DAccessories Included Two 11 mm installation screws, two 8 mm installation screws, two washersModel AT-VM95SPMounting Feature Half-inch mountRecommended Load Capacitance 100 to 200 pFReplacement Stylus AT-VMN95SPStylus Size 3 milType VM Stereo Dual MagnetWeight 6.1 g (0.22 oz)Wire Used for Coil T.P. CopperUPC: 4961310146030